Klikstrom Square Wooden Fence Post - 1.8M

Generally, set posts to a depth of 1/3 to 1/4 of the total post height. For a 1.8M post, a depth of about 0.6M is usually sufficient.

Use standard concrete mix suitable for ground contact applications.

Post spacing depends on the size of the fence panels. Refer to the panel manufacturer's specifications for recommended spacing.

Yes, you can paint or stain the posts. Allow the posts to dry completely after installation before applying any finish. Use exterior-grade paint or stain.

Use pressure-treated posts designed for ground contact. Apply a wood preservative or sealant periodically to protect the wood from moisture and decay.

You'll need a post-hole digger, level, measuring tape, concrete mix (or compacted soil), and tools for attaching the fence panels (e.g., screws, nails, hammer, drill).

Ensure the post is set at the correct depth and that concrete or compacted soil is properly packed around the post. Consider adding additional support if necessary.

Ensure that ground contact rated posts are used. Check for drainage issues around the base of the post. Consider applying wood preservative.

Verify the dimensions of the fence panels and ensure they are compatible with the post spacing. Adjust post spacing if necessary.