Auto Extreme Grey Primer - 400ml

Coverage varies depending on surface texture and application thickness, but a 400ml can typically covers approximately 1-2 square meters.

Yes, this primer is generally suitable for plastic, but it is recommended to test on an inconspicuous area first to ensure compatibility.

Touch dry in approximately 15-20 minutes, and ready for recoating or topcoat application in 1-2 hours, depending on conditions.

While it provides a matte finish, it is intended as a primer. For a durable and decorative finish, it should be overcoated with a suitable topcoat.

This primer is suitable for general automotive touch-ups and parts, offering good adhesion and coverage. For professional automotive bodywork, specific automotive primers may be recommended.

Grey is a neutral primer color that works well under most colors, helping to create a consistent base and enhance the vibrancy of subsequent layers.

Shake the can more thoroughly. Ensure the nozzle is clear by inverting and spraying briefly after each use. If blockage persists, try cleaning the nozzle with a solvent-safe cleaner or replace the can.

Ensure the surface was properly cleaned and prepared before application (free from grease, dust, and moisture). Check if the surface is compatible with the primer. Ensure adequate drying time between coats and before applying the topcoat.

Apply thinner coats from a consistent distance. Avoid applying in excessively humid or cold conditions. If drips occur, allow them to dry fully and then gently sand them down before re-applying.