Best current price£311.10from eBay
Shopping.co.uk recommended and popular offers
eBay£311.10Visit shop MAKITA HR3012FCJ 110v 3 function hammer SDS plus
Visit shop
B&Q£517.95Visit shop B&Q - Hr3210Fct/2 Sds Plus Rotary Hammer Drill Qc Chuck 850W 240V
Visit shop11 offers from £311.10 - £628.95
View price history by clicking the chart icon.
The Makita HR3210FCT is a high-performance rotary hammer drill engineered for professional contractors and serious DIY enthusiasts who require significant impact power for heavy-duty drilling and chiseling in concrete and masonry. With its robust 850W motor and 4.9 Joules of impact energy, it excels at demanding renovation tasks, though its 5.4 kg weight may cause fatigue during prolonged overhead operation.
| Model Part Number | HR3210FCT |
|---|---|
| Brand | Makita |
The HR3210FCT can drill up to 32mm in diameter when working with concrete.
This tool uses the SDS-Plus system, which is designed for specific SDS-Plus shank bits. If you use the quick-change chuck, you may be able to use standard bits depending on the adapter provided.
The tool features a low-vibration design developed specifically to minimize the physical impact on the operator compared to older models.
Yes, it is designed for demanding drilling and chiseling applications.
It provides 4.9 Joules of impact energy.
Ensure the shank of the bit is clean and free of debris, and apply a small amount of bit grease before inserting it into the SDS-Plus chuck.
Check the operating mode switch to ensure it is fully set to the hammering or drilling-with-hammering position.
Verify that the power cable is firmly connected and the tool is receiving electricity; if the tool runs but the light remains off, inspect the lens for damage.
To begin, ensure the SDS-Plus bit is properly seated in the chuck until it clicks into place. For the quick-change chuck, ensure the locking ring is fully engaged before starting the motor. The tool is compatible with standard SDS-Plus masonry bits up to 32mm for concrete.
Care Instructions:
