ToughBuilt StackTech 2-Drawer Locking Box - TB-B1-D-72

The StackTech system features auto-locking integration. Simply align the boxes and push down until you hear or feel a click. This ensures each unit locks securely to the one below it.

Yes, each of the two drawers has its own independent lock and comes with a key, allowing you to secure contents separately.

The box is constructed with high-performance polymers designed to resist deformation and shocks, and features powder-coated, armored steel corners for enhanced drop protection.

While it is designed for the ToughBuilt StackTech system, its base may fit on some standard shelving, but it will not interlock or stack securely with other systems.

You can use a dry brush to remove dust. For stiffness, a small amount of graphite lubricant or silicone spray applied directly to the lock cylinder can help. Avoid oil-based lubricants that attract dust.

Please refer to the product packaging or the ToughBuilt website for specific warranty information, as it can vary by region and product line.

Yes, replacement drawer dividers are typically available. Contact ToughBuilt customer support or check their official website for ordering information.

Ensure the drawer is not overfilled. Check for any obstructions inside the drawer or on the slides. Make sure the locking mechanism is fully disengaged.

Verify that both units are clean and free of debris. Ensure the interlocking features are properly aligned before attempting to connect. Check for any damage to the interlocking mechanism on either unit.

Gently apply a graphite lubricant or a silicone-based spray to the keyhole and lock cylinder. Insert and remove the key several times to distribute the lubricant. Ensure the drawer is fully closed before attempting to lock.

Confirm that the dividers are correctly seated in their designated slots. Ensure they are oriented correctly as per the product manual. If dividers are damaged, contact customer support for replacements.