The FloPlast Hi Cap Cast Iron Effect Running Outlet is designed for use with 115mm deep flow capac...The FloPlast Hi Cap Cast Iron Effect Running Outlet is designed for use with 115mm deep flow capacity gutter systems, offering an attractive cast iron effect appearance while ensuring high flow capacity. It features a pre-fitted gutter seal retaining clip for secure installation.Features:- Suitable for 115mm high flow capacity gutter systems- Attractive cast iron effect design- Pre-fitted gutter seal retaining clipBenefits:- Enhances the aesthetic appeal of your gutter system- Improves water flow efficiency by allowing for higher volume of water movement. Main Product Description: The FloPlast Hi Cap Cast Iron Effect Running Outlet is designed for use with 115mm deep flow capacity gutter systems, A Running Outlet is the fitting which connects the guttering to the downpipe. Essentially a tee piece, running outlets can be used at either the centre or the end of the run of gutter. If the outlet is installed at the end then a short piece of gutter with an external stopend attached is used to extend the gutter past the end of the brickwork to catch any rainfall from the overhanging tiles. The outlet has moulded screwholes to enable it to be fixed back to the fascia board. The downpipe connection is a simple push fit onto our 68mm round downpipe.
Best current price£24.70from Professional Building Supplies
The FloPlast Hi Cap Cast Iron Effect Running Outlet is designed for use with 115mm deep flow capacity gutter systems, offering an attractive cast iron effect appearance while ensuring high flow capacity. It features a pre-fitted gutter seal retaining clip for secure installation.Features:- Suitable for 115mm high flow capacity gutter systems- Attractive cast iron effect design- Pre-fitted gutter seal retaining clipBenefits:- Enhances the aesthetic appeal of your gutter system- Improves water flow efficiency by allowing for higher volume of water movement. Main Product Description: The FloPlast Hi Cap Cast Iron Effect Running Outlet is designed for use with 115mm deep flow capacity gutter systems, A Running Outlet is the fitting which connects the guttering to the downpipe. Essentially a tee piece, running outlets can be used at either the centre or the end of the run of gutter. If the outlet is installed at the end then a short piece of gutter with an external stopend attached is used to extend the gutter past the end of the brickwork to catch any rainfall from the overhanging tiles. The outlet has moulded screwholes to enable it to be fixed back to the fascia board. The downpipe connection is a simple push fit onto our 68mm round downpipe.