Best current price£14.74from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£14.74Visit shop Thorsman 4In1 Multi Purpose Digital Detector Studmetallive Ac Wire Detecting With Lcd Display 60V Imt23104 Greengrey 3606481275660
Visit shop1 offer from £14.74
View price history by clicking the chart icon.
The Schneider Electric Thorsman Digital Detector (IMT23104) is designed for professionals in construction, fitment, and carpentry, offering versatile detection capabilities for studs, metal, and live AC wires. Its primary benefit is providing accurate detection depths for various materials, enhancing safety and efficiency on job sites. A key caveat is the limited detection depth for wood studs, requiring careful consideration for thicker materials.
| Model Part Number | IMT23104 |
|---|---|
| Brand | Schneider Electric |
The Schneider Electric Thorsman Digital Detector can find wood studs, metal objects (like pipes and studs), and live AC wires.
The maximum detection depth for wood studs (30x30 mm) is 18 mm.
This detector is primarily designed for ferrous metals. Its performance with non-ferrous metals like copper may vary and is not guaranteed within the specified depths.
To calibrate, place the detector on a clear surface (without any detected objects), select the desired mode, and press and hold the calibration button until the device indicates calibration is complete.
The detector can identify live AC wires within a voltage range of 90-250V at frequencies of 50-60 Hz.
The product information does not specify the battery type. Please refer to the product packaging or manual for battery requirements.
This detector is not optimized for use on thick concrete. Its detection capabilities are best suited for drywall, plaster, and wood.
Check that the batteries are inserted correctly and have sufficient charge. Replace with new batteries if necessary.
Ensure the device is calibrated correctly on a clear surface before each use. Verify you are within the specified detection depths and modes. Avoid scanning over metal studs or pipes with the wood stud setting.
Ensure the AC wire is live and within the detection range (90-250V, 50-60Hz). Move the detector slowly and steadily over the suspected area.
Check battery levels. If low, replace the batteries. Ensure the screen is clean.
Setup:
Compatibility:
This detector is designed for use on standard drywall, plaster, and wood surfaces. It is most effective when scanning for materials within its specified detection depths. It is not intended for use on metal lath, thick concrete, or tile without specific adapters or conditions.
Care:
