FloPlast Gutter Union Bracket - 115mm x 75mm Anthracite Grey

You will need a screwdriver or drill for attaching the union to the fascia board, and potentially a saw if you need to cut the guttering to size.

No, the screws for attaching the union to the fascia board are not included and must be purchased separately.

Ensure the guttering is clipped securely into the union, and aligned with the insertion marks inside the union. Check for any gaps or leaks.

Regularly inspect the union for debris or blockages. Clean with a soft cloth and mild detergent if necessary.

The FloPlast Gutter Union is designed for use with FloPlast deepflow guttering systems. Compatibility with other brands is not guaranteed.

The rubber seal provides a watertight barrier, preventing leaks at the connection point.

Carefully unclip the front edge of the guttering from the union. This may require some gentle force.

Check the gutter is correctly positioned within the union, and that the rubber seal is properly compressed. Re-clip the gutter if necessary. Ensure the guttering is aligned with the insertion marks.

Ensure the union is securely attached to the fascia board with screws. Check the clips are properly engaged. Replace the screws if they have become worn or damaged.

Make sure you have the correct size of union for the guttering. Check for any obstructions within the union that might be preventing the guttering from seating correctly.