Best current price£11.95from eBay
Shopping.co.uk recommended and popular offers
eBay£11.95Visit shop Startech 2.5M Purple Slim Cat6 Ethernet Cable Snagless Rj45 Utp Lszh 28Awg Pure
Visit shop3 offers from £11.95 - £14.88
View price history by clicking the chart icon.
This 2.5-meter purple Slim CAT6 Ethernet cable from StarTech.com is designed for users in high-density network environments who need a flexible and reliable connection. Its key benefit is enhanced airflow and easier routing in crowded racks due to its 36% slimmer diameter, while also supporting Power over Ethernet (PoE++) up to 100W. A potential caveat is that while slim, ensuring proper strain relief during frequent connections and disconnections is still important for longevity.
| Series | Slim Cat6 |
|---|---|
| Model Part Number | N6PAT250CMPLS |
| Brand | StarTech.com |
The primary advantage is its significantly smaller diameter (36% slimmer) compared to standard Cat6 cables, which allows for easier routing in crowded spaces, improved airflow, and greater flexibility.
Yes, this cable specifically supports PoE++ (802.3bt Type 4) up to 100W, making it suitable for high-power PoE devices.
LSZH stands for Low Smoke Zero Halogen. This type of jacket material emits minimal smoke and no toxic halogens when exposed to high heat or fire, making it safer for use in enclosed or poorly ventilated areas.
No, this cable is Unshielded Twisted Pair (UTP). It is designed for environments where heavy electromagnetic interference is not a primary concern.
This Cat6 cable supports data transfer rates of up to 1000 Mbps (Gigabit Ethernet) and operates at a frequency of 250 MHz.
The 28AWG wire gauge is thinner than standard Cat6 (typically 24AWG), contributing to the cable's slimness and flexibility. It is suitable for data transfer and PoE up to the specified limits but may have slightly higher resistance than thicker gauge wires over very long distances.
Yes, the cable is Fluke Tested to ensure it meets Category 6 performance standards, including minimal Near-End Crosstalk (NEXT) and Return Loss (RL).
Ensure both RJ45 connectors are fully seated in their ports. Check that the cable is not damaged. Test with a different known-good cable and port to isolate the issue. Verify network device configurations.
Confirm the connected network device and switch/injector support PoE++ (802.3bt Type 4) and the total power draw does not exceed the 100W budget. Ensure the cable is a genuine Slim CAT6 cable rated for 100W PoE++ and that it is undamaged.
Verify the cable is functioning as Cat6 (250MHz). Ensure connected devices and network infrastructure support Gigabit Ethernet. Check for excessive cable length or interference, though the LSZH jacket and UTP construction minimize susceptibility.
While the snagless design helps prevent this, if a connector is damaged, the cable may need replacement. Handle connectors with care, ensuring the release tab is properly depressed before removal.
Setup:
Compatibility:
Care:
