Timco Medium Tee Hinges - Black - 14"

Fixings are not included. The recommended screw diameter is 4.0mm, with an imperial gauge of 8.

Yes, they are suitable for domestic timber gates, especially in rural or sheltered areas due to their epoxy black finish (Corrosion Rating 2). For very exposed coastal locations, consider alternative corrosion-resistant materials.

These hinges are designed for medium-weight use and can support a maximum gate weight of 30kg.

Basic tools such as a screwdriver (matching your chosen screw type), a measuring tape, and a pencil are generally sufficient for installation.

While primarily designed for timber applications, they can be used on metal doors/gates if appropriate fixing methods and hardware for metal are employed.

Corrosion Rating 2 indicates suitability for environments that are occasionally damp or wet, such as rural and sheltered areas. It suggests moderate resistance to corrosion.

To maintain the finish, clean with a soft, slightly damp cloth. Avoid harsh chemicals or abrasive cleaners that could scratch or damage the epoxy coating.

Apply a small amount of lubricating oil (e.g., WD-40 or a silicone-based lubricant) to the knuckle joint of the hinge. Work the hinge back and forth to distribute the lubricant.

Ensure the gate/door is within the recommended weight limit (30kg). If the gate/door is over 2130mm (7ft) high, install an additional hinge as per the product notes to distribute weight more evenly.

Ensure you are using screws of the correct diameter (recommended 4.0mm) and appropriate length for the material. For softer woods, consider using pilot holes or wood filler/plugs for a more secure fit.

While the epoxy black finish offers corrosion resistance, prolonged exposure to moisture can still cause minor surface rust. Clean the affected area with a soft cloth and apply a rust inhibitor or a coat of clear lacquer for protection.