Taskar 100mm X 100mm Quick-Fit Timber Fence Post Extender - Red Oxide

The Taskar Quick-Fit Post Extender can raise timber fence posts by up to one meter.

It is designed exclusively for 100mm x 100mm (4 inch x 4 inch) timber fence posts.

The extender uses internal inverted fins to create a secure, vice-like hold on the timber post. For maximum security, especially in high-wind areas, reinforcing with screws is recommended.

The red oxide powder coating provides medium rust protection. For extended durability in harsh weather conditions, it is advisable to paint over the extender with an appropriate metal paint.

No, this extender is specifically designed for timber posts and is not compatible with metal or other post materials.

The Taskar Quick-Fit Post Extender is sold as a single pack unit.

Generally, no special tools are required for the 'quick-fit' attachment itself. A hammer or mallet might be useful to ensure it's fully seated. If adding screws for reinforcement, standard drilling tools would be needed.

Ensure the post is clean and free from debris. Slightly loosen the grip of the internal fins by gently tapping the sides of the extender, or ensure the post is precisely 100mm x 100mm. Do not force the extender; check for obstructions.

Check that the internal fins have engaged fully with the timber. Ensure the post itself is not compromised. For added security, consider drilling pilot holes and inserting screws through the extender into the timber post.

The red oxide coating offers medium protection. For improved rust resistance, clean the affected area and apply a coat of suitable exterior metal primer followed by a topcoat of metal paint.