Permanent Textile Marker Sets - Dual Tip - 20 Pack

It is recommended to pre-wash the fabric without using fabric softener. Ensure the fabric is clean, dry, and free of any sizing or finishes. Using the markers on natural, light-colored fabrics like cotton yields the best results.

After the ink has completely dried (allow at least 24 hours), place a piece of scrap fabric or parchment paper over the design. Iron the area on a medium-high setting (no steam) for 3-5 minutes, moving the iron constantly. This process permanently bonds the ink to the fabric fibers.

These markers are designed for light-colored fabrics. While you might achieve some visibility on medium tones, they are not recommended for dark or black fabrics without using a primer or fabric medium specifically designed for markers on dark surfaces.

When stored horizontally with caps tightly sealed, the markers should maintain their ink quality for a considerable period. However, consistent use and proper storage are key to their longevity.

Yes, the 20 standard colours offer a vibrant palette. The fine tip allows for intricate details and precise lines, while the broad tip is suitable for coloring larger areas, making them versatile for detailed artwork as well as bold designs.

These markers are suitable for children, but adult supervision is recommended, especially during the heat-setting process. Ensure children do not ingest the ink and use them in a well-ventilated area.

Ensure the marker has been shaken vigorously for at least 30 seconds. Press the tip onto scrap paper to re-prime the ink flow. Check if the cap was left off for an extended period.

This can happen on very thin or loosely woven fabrics. Try using lighter pressure and smaller strokes. Ensure the fabric is taut and smooth. Pre-washing the fabric without softener can also help.

Ensure the fabric is light-colored and made of natural fibers like cotton. Proper heat setting is crucial; make sure the ironing process was sufficient (3-5 minutes at medium-high heat).

The design was likely not properly heat-set. Ensure the ink was completely dry before ironing and that the ironing process was thorough and for the recommended duration.