Schmetz Hemstitch Wing Machine Needles - 120/19

It's used for creating decorative holes in fabric, ideal for broderie anglaise, whitework embroidery, and heirloom sewing effects on loosely woven fabrics without manual thread removal.

You absolutely need a zigzag needle plate with an elongated stitch hole and should use a zigzag or satin stitch foot to prevent needle breakage.

It is best suited for loosely woven fabrics like linen. Tightly woven or very stretchy fabrics may not produce the desired decorative hole effect and could lead to fabric damage.

You should use a satin stitch or zigzag stitch. The stitch width needs to be adjusted carefully to avoid the needle hitting the presser foot or needle plate.

It refers to the needle's thickness. '120' is the European sizing, and '19' is the approximate US sizing. This is a thicker needle suitable for decorative work on medium to heavier weight fabrics.

Ensure you are using the correct needle plate and presser foot, that the stitch width is set appropriately, and that the needle is inserted correctly and is not bent. Avoid excessive force or stitching through very thick seams without preparation.

It is compatible with most home sewing machines that accept the 130/705 H WING needle system. However, the requirement for a specific needle plate and foot is critical for compatibility.

Ensure you are using a zigzag needle plate with an elongated stitch hole and a zigzag/satin stitch foot. Verify that the stitch width is correctly adjusted so the needle does not strike the foot or plate. Check that the needle is inserted correctly and is not bent.

Check if the needle is bent or dull and replace if necessary. Ensure the correct needle system (130/705 H WING) is used. Thread the machine correctly, and ensure the thread tension is properly balanced.

The fabric might be too densely woven for this needle. Ensure you are using a loosely woven fabric like linen. Check that the stitch width is appropriate and the needle is not striking the fabric excessively. Test on a scrap first.

This indicates an incorrect stitch width setting or incompatible accessories. Reduce the stitch width, ensure you are using a zigzag/satin stitch foot, and confirm the zigzag needle plate is installed correctly. Check that the needle is fully seated in the machine.