Best current price£14.95from Amazon
Shopping.co.uk recommended and popular offers
Amazon£14.95Visit shop Secure Fix Direct Bow Shackle With Screw Pin 8.5 Ton (Lifting Towing Galvanised Steel 8500Kg)
Visit shop8 offers from £14.95 - £19.75
View price history by clicking the chart icon.
This guide is for professionals and DIYers requiring a heavy-duty lifting and towing solution. The SecureFix Direct 8.5 Ton Bow Shackle offers robust, drop-forged steel construction with a high safety factor for secure load management. A potential caveat is that test certificates require a separate request.
| Model Part Number | SFUSSPB8.5 |
|---|---|
| Brand | SecureFix Direct |
The Safe Working Load (SWL) for this SecureFix Direct Bow Shackle is 8.5 tonnes (approximately 18,739 lbs).
A test certificate can be supplied upon request. Please contact customer support via email to request it.
Yes, this shackle is suitable for lifting applications provided it is used in a straight pull configuration and the total load does not exceed its 8.5-tonne SWL. Always ensure proper rigging practices are followed.
A 5:1 safety factor means the shackle's ultimate breaking strength is at least five times its Safe Working Load. This provides a significant margin of safety against unexpected shock loads or minor overloads.
While the hot-dipped galvanised finish offers corrosion resistance, prolonged exposure to saltwater is not recommended as it can accelerate corrosion. Clean the shackle thoroughly with fresh water after exposure and store it in a dry place.
The key dimensions are: A=25mm, B=28mm, C=44.5mm, D=58mm, E=93mm, F=67mm, G=35.5mm. These refer to specific measurements of the shackle's body and pin.
No, the color may vary from the image shown. The galvanised finish provides protection, but the exact hue can differ.
Clean the threads on both the pin and the shackle body. Remove any dirt, debris, or rust. Apply a light coat of grease to the threads to aid smooth insertion and tightening. Ensure no cross-threading has occurred.
Light surface rust can often be removed with a wire brush. For deeper corrosion, assess if the structural integrity has been compromised. If significant material loss or pitting is present, the shackle should be retired and replaced. A hot-dipped galvanised finish provides protection; minimize exposure to highly corrosive environments.
Any visible deformation, bending, or twisting indicates the shackle has been subjected to loads exceeding its rating or has experienced impact damage. Such a shackle must be immediately removed from service and replaced to prevent failure.
Ensure the correct pin is being used and that it is fully threaded. If it consistently sits proud, check for thread damage or obstructions. For safety, the pin should be fully engaged and ideally flush or slightly recessed within the shackle body.
Setup:
Compatibility:
This shackle is compatible with standard lifting and towing equipment such as chains, wire ropes, and synthetic straps that are rated for the intended load and fit within the shackle's jaw dimensions.
Care:
