Durable Kitchen Matt Paint - White

While formulated for kitchens, its moisture and mould-resistant properties make it a suitable choice for bathrooms with good ventilation.

Drying times can vary based on temperature and humidity, but typically allow at least 2-4 hours between coats.

Yes, but it's recommended to lightly sand the gloss surface to ensure proper adhesion of the new paint.

Use a soft cloth with warm water and a mild detergent. Avoid harsh chemicals or abrasive scrubbers.

The insulating technology helps to reduce heat loss, contributing to a warmer room and potential minor energy savings. It is not a substitute for primary heating systems.

For spray application, you must remove filters and increase the nozzle size to between 0.019X and 0.026X. Thinning may also be necessary.

Coverage can vary, but typically expect around 10-12 square meters per litre per coat. Always refer to the product packaging for specific details.

Ensure the surface was properly cleaned, degreased, and dry before application. If painting over a glossy surface, ensure it was adequately de-nibbed or primed.

Apply paint evenly with consistent pressure. Avoid overworking the paint. Use a high-quality brush or roller and ensure even spreading. For spray application, ensure correct nozzle size and pressure.

Ensure the underlying cause of the mould (e.g., persistent dampness, poor ventilation) has been addressed. Clean the affected area thoroughly before repainting.

Allow paint to cure fully (typically 7 days) before attempting heavy cleaning. Use a soft cloth and mild, non-abrasive cleaner. Stubborn stains may require gentle rubbing.