Best current price£1.26from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£1.26Visit shop Timco 9090Ab Angle Brackets - Galvanised 90 X 90 Unit 1
Visit shop
The Range£73.80Visit shop Teco Angle Bracket Galvanised - 50 X 50 X 27.5Mm X 2.4Mm Thick. (Box Of 100) - Silver
Visit shop5 offers from £1.26 - £78.58
View price history by clicking the chart icon.
The Teco Angle Bracket is designed for professional builders, contractors, and DIY enthusiasts who require robust structural support for framing, joist connection, and beam reinforcement. Its primary benefit is providing reliable load-bearing stability through a heavy-duty 2.4mm steel construction, though users should note that fasteners are not included, requiring separate procurement of screws or nails compatible with their specific substrate.
| Colour | Silver |
|---|---|
| Model Part Number | 9ANGLEBRKT/003 |
| Brand | Teco |
No, the Teco Angle Bracket is supplied as a box of 100 brackets only. Fasteners must be purchased separately.
Yes, but ensure the fasteners used are rated for exterior use, and consider if the specific environmental exposure requires additional rust protection.
The steel used in these brackets is 2.4mm thick.
Each box contains 100 individual brackets.
Yes, the 2.4mm construction is designed for robust, load-bearing applications in timber framing.
Ensure that the timber is dry and that the fasteners are fully tightened to pull the bracket flush against the wood surface.
Check that the screws are the correct gauge for the pre-punched holes; if the fit is too tight, pilot holes in the timber may be required.
To install the Teco Angle Bracket, ensure the timber surfaces are flush and square before marking your fastener positions through the pre-punched holes. Use high-quality wood screws or structural nails that match the diameter of the pre-drilled holes to ensure optimal load transfer. While the silver finish provides baseline protection, it is recommended to inspect the brackets periodically for signs of moisture-induced surface oxidation if installed in humid or exterior environments. Ensure that the fasteners used are compatible with the material of the beam or joist to prevent galvanic corrosion.
