Aqualisa Mach Shower Pump - Mach 340
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Aqualisa Mach Shower Pump - Mach 340 is designed for plumbers and heating engineers looking to enhance shower performance in properties with low water pressure. Its key benefit is providing a consistent and powerful 3.4 Bar flow rate, improving the shower experience significantly. However, it requires professional installation due to its pump nature and is best suited for dedicated shower circuits.
All features
| Model Part Number | MC0340 |
|---|---|
| Brand | Aqualisa |
Extended Product Information
FAQs
What is the main benefit of the Aqualisa Mach 340 pump?
The main benefit is significantly improving weak water pressure, providing a consistent and powerful 3.4 Bar flow rate for a much better showering experience.
Do I need a professional to install this pump?
Yes, due to its nature as a pump system requiring electrical and plumbing connections, professional installation by a qualified plumber is essential for safety and performance.
Can this pump be used to boost pressure for my entire house?
No, the Aqualisa Mach 340 is designed specifically for boosting shower performance and is not intended for whole-house water supply boosting.
What does 'Regenerative 3.4 Bar Twin Shower Pump' mean?
It means it's a twin pump system (for hot and cold water) that generates 3.4 Bar of pressure using a regenerative design, efficient for boosting flow.
Is this pump safe to use?
Yes, the pump is CE and WRAS approved, indicating it meets European safety standards and water regulations.
What maintenance is required?
Maintenance is minimal. Periodically check for unusual noises and keep the area around the pump clear. Any repairs should be handled by a professional.
What should I do if the pressure seems low after installation?
First, check that water is flowing sufficiently to activate the pump's flow switch and inspect for any pipework blockages or kinks. If the problem persists, consult your installer.
Troubleshooting
Pump not switching on
Check the electrical supply to the pump and ensure the flow switch is activated by water movement. Verify that the water supply is adequate to trigger the switch.
Low or inconsistent water pressure
Ensure filters are clean and free from blockages. Check for kinks or restrictions in the pipework. Confirm that the water supply to the pump is sufficient.
Unusual noise from the pump
This could indicate air in the system or a potential issue with the pump bearings. Bleed the system to remove air. If noise persists, contact a qualified installer for inspection.
Pump runs constantly
This may indicate a problem with the pressure switch or a persistent demand for water. Check for leaks and ensure the flow switch is functioning correctly.
Pros and Cons
Pros
- Significantly improves low water pressure for a better shower experience.
- Reliable and durable construction for professional use.
- Meets essential safety and water regulations (CE and WRAS approved).
- Consistent pressure output for a balanced shower.
- Twin pump design ensures equal pressure for hot and cold water.
Cons
- Requires professional installation due to it being a pump system.
- Best suited for dedicated shower circuits, not whole-house water boosting.
- Can add complexity to the plumbing system.
- Initial cost may be higher than simpler shower head solutions.
Setup, Compatibility & Care
Setup: Installation of the Aqualisa Mach Shower Pump - Mach 340 should only be performed by a qualified plumber. It requires connections to both hot and cold water supplies and a dedicated electrical power source. Proper system integration, including pipework sizing and venting, is crucial for optimal performance and safety. Refer to the manufacturer's installation manual for detailed instructions.
Compatibility: This pump is designed to work with standard UK plumbing systems. It is suitable for boosting pressure for showers, and potentially a single tap if plumbed accordingly, but is not intended for whole-house water supply boosting. Ensure your existing pipework can accommodate the flow rates and that there is a suitable location for the pump, typically near the shower water source.
Care: Regular maintenance is minimal. Periodically check for any unusual noises or vibrations from the pump. Ensure the area around the pump is kept clear of debris. If any issues arise, do not attempt to repair it yourself; consult a qualified professional.