Manfrotto 357PLONG Long Sliding Plate

The 'long' version offers an extended 140mm sliding range, which is crucial for achieving perfect balance with cameras that have unusual weight distribution, such as those with long telephoto lenses or large battery grips.

The plate comes supplied with two 1/4" and two 3/8" camera screws to ensure compatibility with a wide variety of camera models.

No, this plate requires a tripod head that features a compatible quick-release system designed to accept this type of sliding plate.

The scale allows you to mark and record the exact position of your camera on the plate for perfect balance. This is useful for quickly re-establishing the same balance point if you remove and reattach your camera.

The VHS location pin is a small pin that can slide along the plate's length. It helps prevent the camera from rotating on the plate, providing extra security and stability, especially for camcorders.

The plate is constructed from durable aluminium, offering a good balance of strength and weight.

The Manfrotto 357PLONG plate weighs 190g.

Ensure the camera is properly centered on the plate and the quick-release mechanism is fully locked. Adjust the plate's position along the 140mm range for optimal balance. Check if the VHS location pin is engaged correctly.

Verify that your tripod head uses a compatible quick-release system. Ensure no debris is obstructing the receiver on the tripod head or the plate's locking grooves.

Confirm you are using the correct size screw (1/4" or 3/8"). Ensure the camera's tripod socket is clean and free of debris. Do not force the screw; it should thread smoothly.

Gently clean the sliding surface and the track of the plate. Remove any dirt or grit. A very small amount of dry lubricant might be applied sparingly if necessary, but avoid oils that attract dust.