Best current price£49.99from Amazon
Shopping.co.uk recommended and popular offers
Amazon£49.99Visit shop Lumberjack 910W Electric Planer Wood 82mm 3.5mm Depth Wood Planer 230V | 910W planer with 82mm cutting width, 3.5mm depth, 16,500 RPM, twin blades and dual dust extraction.
Visit shop
eBay£359.99Visit shop Lumberjack Planer Thicknesser 1500W 10in 254mm HSS Twin Blade with Stand 230V
Visit shop7 offers from £49.99 - £1,199.99
View price history by clicking the chart icon.
This guide is for woodworkers seeking to flatten and straighten the edges of boards with the Lumberjack Tools 6" Surface Planer. The planer's compact design and powerful motor make it ideal for smaller workshops or on-site projects, providing accurate results. However, users should be mindful of the 3mm maximum cutting depth per pass to avoid overloading the motor and ensure optimal performance. Key features include a 153mm cutting width, adjustable fence, and a dust collection system.
| Brand | Lumberjack Tools |
|---|
There is a depth adjustment mechanism, consult the owner's manual for specific instructions.
The planer uses 153mm HSS blades. The unit comes with two blades.
Replace the blades when they become dull or when the quality of the cut deteriorates. The frequency depends on use.
It is not recommended to plane wet wood, as it can cause the wood to tear out, and the moisture can cause rust.
Use a brush or vacuum to remove wood shavings. Wipe down the table and fence with a clean, damp cloth.
Always wear safety glasses and hearing protection. Ensure the wood is free of any metal objects. Never reach into the planer while it is running.
The maximum cutting width is 153mm.
The maximum cutting depth is 3mm per pass.
Check that the blades are sharp and correctly installed. Adjust the cutting depth.
Reduce the cutting depth per pass. Check the power supply and ensure the motor is not overloaded.
Ensure blades are sharp. Adjust the feed rate. Consider using a slower feed rate for dense or difficult-to-plane wood.
Ensure the dust bag is properly attached and not full. Consider using a dust extractor for improved dust collection.
