Best current price£196.02from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£196.02Visit shop G.skill Ripjaws - Ddr4 - 8 Gb - So-Dimm 260-Pin - Unbuffered 4713294220837
Visit shop2 offers from £196.02
View price history by clicking the chart icon.
The G.Skill Ripjaws 8GB DDR4 SO-DIMM is an ideal upgrade for users looking to improve the multitasking and gaming performance of their compatible laptops or small form factor (SFF) PCs. Featuring a 2666 MHz clock speed and energy-efficient 1.2V operation, it provides a stable performance boost through high-quality, hand-picked components; however, users should ensure their system supports 2666 MHz memory speeds to fully utilize this module's potential.
| Series | Ripjaws |
|---|---|
| Model Part Number | F4-2666C19S-8GRS |
| Brand | G.Skill |
This is a SO-DIMM module, which is intended for laptops and small form factor PCs. It will not fit in a standard desktop motherboard.
The system will typically default to the speed and latency of the slowest module installed. For best performance, it is recommended to use modules with identical specifications.
The system should detect it automatically, but you should enter your BIOS to ensure the Intel XMP 2.0 profile is enabled for optimal performance.
Yes, all G.Skill memory products come with a limited lifetime warranty.
If your laptop has two SO-DIMM slots and you install two identical modules, the system will support dual-channel memory configuration.
Ensure the module is fully seated and the side clips are clicked into place. Try reseating the module if the issue persists.
Access the BIOS and check if the XMP profile is enabled. Also, verify that your motherboard and CPU chipset actually support 2666 MHz speeds.
Run a memory diagnostic tool like MemTest86 to check for hardware errors, or try testing the module in a different compatible laptop.
Before installation, ensure your computer is powered off and unplugged from any power source. Open your device's back panel or chassis according to your manufacturer's manual. Locate the existing RAM slots and gently press down on the metal clips to release the current module if necessary. Align the notch on the G.Skill Ripjaws module with the ridge in the SO-DIMM slot and press firmly until the clips snap into place. Upon booting, enter your BIOS/UEFI to verify the memory is detected and enable the XMP profile to ensure it operates at its rated 2666 MHz speed. Handle the module only by its edges to prevent static discharge or oil transfer to the gold contacts.
