Harris Ultimate Wall & Ceilings Roller Sleeve - 9" - Long Pile

This roller sleeve is specifically designed for use with water-based emulsion paints, particularly on rough or textured surfaces.

Yes, it is recommended to rinse the roller sleeve under cold water and gently squeeze out excess water before its initial use to remove any loose fibers.

After removing excess paint, wash the sleeve in warm soapy water, use a multi-tool to scrape away residue, rinse thoroughly, and allow it to dry completely standing up.

While it is designed for rough surfaces, it can be used on smoother surfaces, but it might apply more paint than a short pile roller. Its main advantage is on textured finishes.

It is designed for Harris 9-inch roller frames and is particularly recommended for use with the Ultimate Work Smarter Roller Frame.

The long pile allows the roller to reach into textured surfaces, providing better coverage and a more even finish on rough walls and ceilings compared to standard short pile rollers.

Yes, the design includes features for superior finish and splatter control, aiming to minimize mess during application.

Ensure the roller sleeve was thoroughly rinsed before its first use to remove any loose fibers.

Verify that the roller sleeve is fully saturated with paint and that you are using appropriate pressure. Ensure the surface is clean and free of debris.

The long pile design helps control splatter, but ensure you are not overloading the roller with paint or applying excessive speed. Check if the roller is compatible with the type of paint being used.

Make sure to follow the cleaning instructions precisely. Incomplete rinsing or drying can impact performance. Store the roller properly after cleaning.