Best current price£71.99from Amazon
Shopping.co.uk recommended and popular offers
Amazon£71.99Visit shop Trend 5-Piece Tct Countersink Set, Imperial, Adjustable Depth | Adjustable Depth And Quick Release System For Fast, Accurate Countersinking In Imperial Sizes, Snap/Cstc/Set
Visit shop15 offers from £71.99 - £109.95
View price history by clicking the chart icon.
The Trend Countersink Set (5 Piece TCT) is designed for woodworkers and DIY enthusiasts needing to create clean, precise pilot holes and counterbored recesses for screws. Its key benefit is the self-clearing, heat-treated tool steel construction with High Speed Steel (HSS) drill bits, ensuring efficient operation and durability, even in abrasive materials. A minor caveat is that the included drills produce pilot holes only, requiring separate attention for larger screw clearance if needed.
| Model Part Number | SNAP/CSTC/SET |
|---|---|
| Brand | Trend |
The set includes five drill and countersink combinations designed to work with screw sizes from No.4 up to No.12.
This set is primarily designed for wood and wood composites. While the TCT tips offer some durability, they are not optimized for drilling metal and may be damaged.
The set produces counterbored holes with a diameter of either 9.5mm (3/8in) or 12.7mm (1/2in), suitable for standard woodplugs.
TCT stands for Tungsten Carbide Tipped. This means the cutting edges are tipped with extremely hard tungsten carbide, making the tool suitable for abrasive materials.
The countersink itself is adjustable. You can also utilize a depth stop on your drill or a temporary mark on the drill bit to control the pilot hole depth, which in turn influences the counterbore depth.
The drill bits are integrated with the countersink. If a drill bit becomes worn or damaged, the entire countersink unit would typically need replacement.
After each use, clean the tools with a dry or slightly damp cloth to remove sawdust and debris. Store them properly to protect the sharp edges.
Ensure the drill bit is sharp and properly seated in the chuck. Check that you are using the correct speed for the material. For very hard materials, a slower speed may be required.
Adjust the depth setting on the countersink or your drill's depth stop. Practice on a scrap piece of wood to achieve the desired depth before working on your project.
Ensure the self-clearing design is functioning. Periodically withdraw the tool from the workpiece during drilling to clear chips, especially in softer woods.
Inspect the carbide tip for chipping or excessive wear. If damaged, the specific bit may need replacement. Avoid using excessive force on the tool.
Setup:
Compatibility:
Care:
