5 Star Office Long Arm Full Strip Stapler - 20 Sheets Capacity

This stapler typically uses standard 26/6 or 24/6 size staples, which are common for full strip staplers.

The stapler is designed to handle a capacity of up to 20 sheets of standard paper.

Yes, its long arm and 300mm throat depth make it ideal for stapling in the center fold of booklets and brochures.

Tacking allows the stapler to fasten papers temporarily to a surface, such as a notice board, without fully clinching the staple.

Yes, the stapler features an adjustable throat depth, offering greater flexibility for different document sizes.

Lift the stapler arm, insert a full strip of staples into the magazine, and close the arm firmly until it locks.

The primary advantage is the extended throat depth, allowing you to staple documents much further from the edge than a standard stapler.

Ensure you are using the correct size staples. Check for any bent or misaligned staples in the magazine. Clean any debris from the stapling mechanism. Do not exceed the 20-sheet capacity.

Check if the staples are fully loaded. Verify you are not exceeding the stapling capacity. Ensure the anvil (the base plate that bends the staple) is clean and correctly aligned.

A small amount of light machine oil applied to the pivot points can help restore smooth movement. Ensure no obstructions are preventing the arm from moving freely.

Inspect the anvil for any damage or debris. The anvil's grooves are designed to bend the staple legs inward. Clean the anvil thoroughly.