Mexco TDXCEL Dry Diamond Tile Drill Bit - 10mm

The Mexco TDXCEL drill bit is designed for use on porcelain, ceramic, and marble tiles.

No, this drill bit is designed for dry cutting and does not require water cooling.

A high-speed corded drill is required.

Apply steady, even pressure and avoid forcing the drill. Start at a slight angle to create an indentation.

The lifespan of the drill bit depends on the material hardness, drilling technique, and frequency of use. The wax-filled core helps extend the bit's life.

The Mexco TDXCEL drill bit is available in 10mm and 12mm diameters.

Store the drill bit in a dry place to prevent corrosion.

The hex fitting provides a secure, non-slip grip in the drill's chuck, enhancing stability during drilling.

Check the drill speed; ensure it is set to high. Verify the bit is suitable for the material. Check for any damage or wear on the diamond tip. Apply even pressure and avoid forcing the drill.

Tighten the drill chuck securely. Ensure the hex fitting is fully inserted.

Reduce the pressure applied while drilling. Ensure the drill bit is perpendicular to the tile surface. Consider starting with a lower speed to create an initial indentation, then increase the speed.