Whiteboard Grid Marking Tape - 66m - Self Adhesive

This tape is primarily used to create clear, precise grid lines and dividers on whiteboards for charts, schedules, planning, and organization.

No, this tape is designed for smooth, non-porous surfaces like whiteboards and glass. It is not recommended for painted walls, as it may damage the paint upon removal.

The roll is 66 meters long.

The tape is single-use. While it can be repositioned shortly after application, it is not designed for repeated removal and reapplication over extended periods.

When applied and removed according to instructions, it should not damage a standard whiteboard surface. However, prolonged application (many months or years) might leave residue upon removal.

Yes, you can cut the tape to any desired length using scissors or a craft knife.

Ensure the whiteboard surface is thoroughly cleaned and dried before application. Press down firmly along the entire length of the tape to ensure good adhesion.

Carefully peel back the affected section and reapply, smoothing it down with your finger or a soft cloth. For large areas, consider using a ruler or squeegee to apply pressure evenly.

Gently warm the tape with a hairdryer on a low setting before peeling. Peel slowly at a low angle. If residue remains, use a whiteboard cleaner or a specialized adhesive remover designed for whiteboards.