Roberts Revival Uno BT DAB/DAB+/FM Bluetooth Radio - Black

DAB (Digital Audio Broadcasting) offers a wider range of stations and often better sound quality with less interference compared to traditional FM (Frequency Modulation) radio, which is analog. DAB+ is an enhanced version of DAB with improved efficiency and audio quality.

Use the 'Mode' button on the radio to cycle through the available sources: DAB, FM, and Bluetooth. The selected mode will typically be displayed on the screen.

Yes, the Roberts Revival Uno BT can operate normally while connected to mains power, regardless of whether batteries are installed or charging (if applicable).

> Info needed: [Battery type and quantity, e.g., 4 x AA batteries]

> Info needed: [Alarm functionality details]

No, the Roberts Revival Uno BT is not designed to be waterproof or water-resistant. Avoid exposing it to moisture, rain, or splashes to prevent damage.

To save a preset, first tune into your desired station. Then, typically, press and hold one of the numbered preset buttons (usually 1-5 or more) until you hear a confirmation tone or see 'Preset Saved' on the display. To recall a station, simply press the corresponding preset button briefly.

Check the volume level on both the radio and your connected Bluetooth device (if applicable). Ensure the correct audio source (DAB, FM, Bluetooth) is selected. If using batteries, check their charge or replace them. For mains power, confirm the adapter is securely plugged into both the radio and the wall outlet.

Ensure the radio is in Bluetooth mode. On your smartphone or device, turn Bluetooth off and on again, then rescan for devices and select 'Roberts Uno BT'. Make sure no other device is currently paired with the radio and that you are within range (typically 10 meters).

Fully extend and reposition the telescopic antenna. Try moving the radio to a different location, away from potential interference sources like other electronic devices (e.g., microwaves, Wi-Fi routers) or large metal objects.

Turn the radio off and on again. If on battery power, check or replace the batteries. If on mains power, ensure the adapter is firmly connected to both the unit and the power source. If the issue persists, perform a factory reset (refer to the user manual for specific instructions).