Best current price£6.40from B&Q
Shopping.co.uk recommended and popular offers
B&Q£6.40Visit shop B&Q - Hook And Loop Detail Sanding Pads Discs 140mm Triangular Mixed Grit 6 Pack
Visit shop2 offers from £6.40
View price history by clicking the chart icon.
This guide is for DIY enthusiasts and professionals seeking efficient detail sanding solutions. The AB Tools BPT072 offers versatile grit selection and a triangular shape for reaching tight spaces, significantly improving finish quality. A potential limitation is the 140mm size, which may not suit very large surface areas. This pack includes six 140mm triangular sanding discs with hook and loop backing, featuring a mixed grit selection (60, 80, and 120 grit) for various material preparation tasks.
| Model Part Number | BPT072 |
|---|---|
| Brand | AB Tools |
The triangular shape is specifically designed to reach and sand corners, edges, and other tight or hard-to-reach areas that standard round sanding discs cannot effectively access.
Use coarser grits (like 60) for removing material or old paint. Use medium grits (like 80) for general smoothing. Use finer grits (like 120) for preparing the surface for finishing or painting.
Yes, these discs are suitable for sanding and smoothing metal surfaces, as well as wood and paint.
Hook and loop refers to a fastening system, similar to Velcro. It allows the sanding disc to be securely attached to and easily removed from a compatible sander's backing pad.
The discs have pre-punched holes that align with the holes on your sander's backing pad. When used with a vacuum system, these holes help draw dust away from the sanding surface.
While the discs are designed for optimal performance until the abrasive is worn, they are intended for a specific task or period. They are not typically cleaned and reused extensively like some other tools. Replace when performance degrades.
The MPN (Manufacturer Part Number) for this product is BPT072.
Ensure the hook and loop surfaces on both the disc and the sander's backing pad are clean and free from dust or debris. Check that the backing pad is in good condition and not worn out.
Verify that the correct grit is being used for the material and task. Ensure the dust extraction holes are not blocked and that the sander is operating at an appropriate speed. Check for debris buildup on the disc surface.
Confirm you are using the recommended grit for the material. Avoid excessive pressure, as this can prematurely wear down the abrasive. Ensure dust extraction is functioning to prevent clogging, which can lead to overheating and faster wear.
Setup:
Compatibility:
Care:
