Micro Christmas Tree Lights - Lights4fun - Green

The set includes 255 warm white LEDs distributed across 16 strands.

The lead wire measures 5 meters (approximately 16.4 feet).

No, the star topper is a decorative element, and the lights are on separate strands that are draped from the star.

These lights are designed for indoor use only. Using them outdoors may cause damage or pose a safety hazard.

To set the timer, plug in the lights and press the designated timer button on the plug. The lights will then operate on a 6-hour on, 18-hour off cycle.

The star topper measures approximately 22cm (H) x 15cm (W).

The wiring and the star frame are green, designed to blend in with natural Christmas trees.

Ensure the plug is securely connected to a working power outlet. Check if the timer function has been activated. Verify that all light strands are properly connected to the main lead.

Inspect the wires for any visible damage or kinks. If damage is found, discontinue use. Ensure all connections are firm. If a specific strand is faulty, it may need to be replaced.

Ensure the timer button has been pressed to activate it. Check the power supply to the outlet. If the issue persists, the timer mechanism may be faulty.

Confirm that the lights are plugged into a functioning power source. Check for any obstructions or excessive dust on the LEDs. Ensure the lead wire is fully extended and not tangled.