Dc fix sticky back plastic designs are so authentic, you will hardly believe it’s a vinyl film. Re...Dc fix sticky back plastic designs are so authentic, you will hardly believe it’s a vinyl film. Rejuvenate a worktop or wrap kitchen doors in minutes, customise furniture like drawer fronts or wardrobe doors. This vinyl can save you thousands on buying new, simply cover what you have. Dc fix is a non-permanent DIY solution, perfect for tenants or landlords looking for a quick fix, the vinyl can be removed fairly easy, use a hairdryer to warm the vinyl first and peel back, any leftover residue can be removed using warm soapy water. Dc fix has a water based low tack adhesive, this allows the vinyl to be repositioned during application, unlike stronger solvent based adhesives. Simply pull the vinyl back and start again. This vinyl has a 5 star rating for adhesion, lightfastness, shrinkage and durability.
This guide is for anyone looking to refresh their furniture or surfaces with the D-C-Fix Marble Pink Self Adhesive Vinyl Wrap Film. It offers an easy, DIY solution to update the look of your worktops, kitchen doors, and other items, saving you the cost of replacements. However, proper surface preparation is key for optimal adhesion and longevity. This guide covers everything from application to care, ensuring a successful and stylish makeover.
All features
Colour
Pink
Brand
d-c-fix
Extended Product Information
FAQs
What surfaces can I apply the D-C-Fix vinyl to?
It is suitable for smooth, non-porous surfaces like wood, laminate, and metal.
How do I remove the vinyl?
Use a hairdryer to warm the vinyl, then slowly peel it back. Any remaining residue can be cleaned with warm soapy water.
Is the adhesive strong?
The vinyl has a 5-star rating for adhesion, but it is also designed to be repositionable during application.
Can I use this on a worktop that gets hot?
While durable, avoid prolonged exposure to high heat. Use trivets or heat-resistant mats for hot items.
What if I make a mistake during application?
The water-based adhesive allows you to reposition the vinyl if you make a mistake. Simply peel it back and try again.
How do I clean the vinyl?
Use a damp cloth and mild detergent. Avoid abrasive cleaners.
How long will the vinyl last?
With proper care and application, the vinyl can last for several years.
Is it easy to cut?
Yes, it can be easily cut with scissors or a utility knife.
Troubleshooting
Air bubbles appear after application.
Lift the vinyl from the affected area, smooth out the bubbles with a squeegee, and reapply.
Vinyl is not sticking properly.
Ensure the surface is clean, dry, and smooth. Use a hairdryer to warm the vinyl and reactivate the adhesive.
Edges are peeling up.
Trim any excess vinyl and use a hairdryer to carefully seal the edges.
Residue left after removal.
Use warm soapy water to clean any remaining adhesive residue.
Pros and Cons
Pros
Simple and quick to apply, saving time and effort.
Offers a stylish and modern marble pink finish.
Cost-effective way to refresh existing furniture.
Repositionable adhesive allows for error correction during application.
Removable, making it suitable for renters and temporary updates.
Durable and long-lasting with a high rating for key properties.
Cons
Requires careful surface preparation for optimal adhesion.
Removal may require a hairdryer and could leave some residue.
Not suitable for extremely high-heat applications.
Edges may be prone to peeling if not applied and sealed properly.
The look is a printed film, which may not fully replicate the feel of real marble.
May require some skill and patience for flawless application on complex shapes.
Setup, Compatibility & Care
Surface Preparation:
Clean the surface thoroughly with warm soapy water to remove dirt, grease, and dust.
Ensure the surface is smooth. Fill any cracks or imperfections.
Allow the surface to dry completely.
Application:
Measure and cut the vinyl film to the required size, leaving a small overlap.
Peel back a small section of the backing paper.
Carefully align the vinyl and apply it to the surface, smoothing out bubbles as you go.
Use a squeegee or soft cloth to remove air bubbles, working from the center outwards.
Trim any excess vinyl with a sharp knife.
Compatibility:
Suitable for use on most smooth, non-porous surfaces like wood, laminate, and metal.
Not recommended for rough or textured surfaces.
Care:
Clean with a damp cloth and mild detergent.
Avoid abrasive cleaners or harsh chemicals.
Protect from prolonged exposure to direct sunlight and extreme heat.