Best current price£9.52from Amazon
Shopping.co.uk recommended and popular offers
Amazon£9.52Visit shop Bright Source Black 2X Led Twin Adjustable Head Security Spot Light, Pir Sensor & Photocell, Ip44 Rated, 20W, 2000Lm, 3Cct Switchable Colour Temperature 3000K 4000K 6000K, For Gardens Driveways Patios
Visit shop1 offer from £9.52
View price history by clicking the chart icon.
This guide is for homeowners looking to enhance outdoor security and visibility with a versatile and efficient lighting solution. The Bright Source 20W LED Twin Spot Security Light offers powerful, adjustable illumination and intelligent sensor technology, but requires careful initial setup for optimal performance. Key features include customizable color temperatures, an adjustable PIR sensor with a 180° detection angle and 12m range, and dual adjustable light heads for targeted coverage.
| Model Part Number | 259343 |
|---|---|
| Brand | Bright Source |
No, the color temperature (3000K, 4000K, or 6000K) must be selected using the small screwdriver *before* installation and wiring.
The PIR sensor has an adjustable range of up to 12 meters.
IP44 is an Ingress Protection rating that indicates the fixture is protected against solid objects over 1mm (like wires) and splashing water from any direction.
You can test the sensor's motion detection and timer functions during daylight by covering the sensor completely with an opaque material (like tape or a dark cloth) and then switching the power on.
The light level dial, often referred to as the photocell, determines the ambient light threshold at which the motion sensor will activate. Setting it higher means it will only turn on when it's darker.
The brightness is fixed at 20W LED. However, you can adjust the direction of the twin heads and the sensor settings for optimal coverage and activation.
Please refer to the product packaging or manufacturer's website for specific warranty information, as this can vary.
Check main power supply. Ensure wiring is correct and secure. Verify the color temperature switch is fully engaged. Test the sensor by covering it in darkness.
The light level (photocell) setting might be too high, or the sensor is being triggered by a constant heat source. Adjust the light level dial to a lower setting or check for obstructions and environmental factors affecting the sensor.
Increase the sensitivity setting. Ensure the detection angle is not obstructed. Check the range setting and ensure the subject is within the 12-meter limit. Cover the sensor during daylight for accurate testing of motion detection.
Increase the timer setting using the timer dial. Ensure the timer is not set to the minimum duration.
Verify that the color temperature switch was correctly set *before* installation and that it is fully engaged.
Setup:
Compatibility:
Care:
