Best current price£10.91from Amazon
Shopping.co.uk recommended and popular offers
Amazon£10.91Visit shop Ab Tools Plastic Pop Blind Rivets Fasteners For Plastic Riveter Gun 5.7Mm – 7.0Mm 40Pc Set
Visit shop
B&Q£10.91Visit shop B&Q - Plastic Pop Blind Rivets Fasteners For Plastic Riveter Gun 5.7mm To 7.0mm 40Pc Set
Visit shop3 offers from £10.91
View price history by clicking the chart icon.
This guide is for professionals and DIY enthusiasts needing to secure plastic components in automotive and other applications. The AB Tools AN216.1 set offers a versatile solution with four sizes of plastic rivets for common tasks like trim, carpet, and seat installation. A key benefit is their compatibility with standard plastic rivet guns, though they are designed specifically for plastic and may not be suitable for heavy-duty metal applications.
| Model Part Number | AN216.1 |
|---|---|
| Brand | AB Tools |
These plastic rivets are designed for securing automotive trims, carpets, seats, and splash guards, primarily in plastic-to-plastic applications.
Yes, you will need a plastic rivet gun for proper installation. The set is designed to work with standard plastic rivet guns.
The set includes 10 rivets of each of the four sizes: 5.7mm x 19mm, 5.8mm x 16mm, 6.6mm x 26mm, and 7.0mm x 18mm, totaling 40 rivets.
No, these rivets are made of plastic and are intended exclusively for plastic components. They are not suitable for fastening metal parts.
Plastic rivets generally offer good resistance to corrosion and environmental factors compared to some metals, making them suitable for outdoor automotive use.
The product weighs approximately 0.1543235834 pounds.
These rivets are designed for use with plastic rivet guns. Using them with a metal rivet gun may damage the rivet or the gun.
Ensure the rivet is fully seated and the rivet gun is aligned correctly. Check that you are using the correct size rivet for the hole and that the rivet gun is suitable for plastic rivets.
This could indicate excessive force or a worn rivet gun. Try a gentler, more controlled pull with the rivet gun. Ensure the rivet gun is in good working order.
Carefully measure the hole and compare it to the rivet dimensions provided. If the hole is slightly too small, you may need to gently ream it. If too large, the rivet may not hold securely.
Setup: To use these rivets, ensure you have a compatible plastic rivet gun. Insert the rivet into the appropriate sized hole in the material you are joining. Place the rivet head against the surface and insert the stem into the corresponding hole on the other piece. Engage the rivet gun and pull the trigger or lever to expand the rivet stem, securing the two pieces of plastic together.
Compatibility: These rivets are designed for use with plastic components and are intended for applications where moderate holding strength is sufficient. They are compatible with standard plastic rivet guns. They are not recommended for structural applications or for fastening metal.
Care: Plastic rivets require minimal care. Keep them in their original packaging or a dry container to prevent dust accumulation. Avoid exposing them to extreme temperatures or harsh chemicals, which could degrade the plastic over time. For cleaning around installed rivets, use a mild soap and water solution with a soft cloth.
