Best current price£10.41from PCHUB.UK
Shopping.co.uk recommended and popular offers
PCHUB.UK£10.41Visit shop Startech.com Red 5M Slim Cat6 Ethernet Cable. Snagless. 100W Poe. Utp.
Visit shop4 offers from £10.41 - £13.75
View price history by clicking the chart icon.
This StarTech.com 5m Red Slim CAT6 Ethernet Cable is designed for IT professionals and network installers working in high-density environments. Its primary benefit is enhanced airflow and flexibility, crucial for managing crowded network racks. A potential caveat is its specific application in high-density scenarios where its slim profile truly shines, though it performs reliably in standard use as well. This cable supports Gigabit Ethernet, PoE++, and features a durable, flame-retardant LSZH jacket for safety.
| Series | Cat6 |
|---|---|
| Model Part Number | N6PAT5MRDS |
| Brand | StarTech.com |
The primary advantage is its significantly reduced diameter (36% thinner than standard Cat6), which allows for better airflow, improved heat dissipation, and easier routing in high-density network installations like crowded server racks.
Yes, this Cat6 cable is backward compatible with Cat5e and will function with devices designed for Cat7, though it will operate at Cat6 speeds (up to 1 Gbps).
LSZH stands for Low Smoke Zero Halogen. It means the cable jacket is made from materials that emit very little smoke and no toxic halogens when exposed to extreme heat or fire, making it safer for use in enclosed or poorly-ventilated spaces.
This cable supports PoE++ (IEEE 802.3bt Type 4) and can reliably deliver up to 100W of power to connected devices.
Yes, the cable features snagless connectors, which means the retaining clip (tab) is protected by the connector housing, preventing it from snagging on other cables or equipment during installation or removal.
The cable uses 28 AWG pure bare copper wire, which provides better conductivity and lower resistance compared to copper-clad aluminum (CCA) wire.
The cable is tested to comply with ANSI/TIA 568 C.2 requirements for Cat6 performance and is Fluke Tested to ensure it meets standards for Near-End Crosstalk (NEXT) and Return Loss (RL).
Ensure both RJ45 connectors are fully seated and have clicked into place. Verify the network devices on both ends are powered on and functioning. Try a different known-good cable to rule out a cable issue.
Check for kinks or sharp bends in the cable. Ensure the cable is not damaged. Verify that the network devices support Gigabit speeds. Test with a shorter or different Cat6 cable to compare performance.
Confirm that both the Power Sourcing Equipment (PSE) and the Powered Device (PD) support PoE++ (IEEE 802.3bt Type 4) and are configured correctly. Ensure the cable is not damaged, as damage can impede power delivery. Verify the total power draw does not exceed the 100W budget.
While designed for density, ensure you are not forcing the cable excessively. Gently guide the cable, utilizing its flexibility to navigate around existing cables and equipment. Avoid sharp bends that could impede signal or power.
Setup:
Compatibility:
Care:
