Shopping.co.uk

Mehr Universal Cv Boot - CVB96

Mehr Universal Cv Boot - CVB96

Universal CV Boot CV96 Qty 1 Kit. Features: Complete with 2 x stainless steel clamps, 60g sachet o...

Best current price£14.70from eBay

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular
eBay£14.70Visit shop

1x Bailcast Universal Drive Shaft Cv Boot Kit Wheel & Tyre Accessories - CVB96

Visit shop

All Offers

4 offers from £14.70 - £109.36

View price history by clicking the chart icon.

eBay1x Bailcast Universal Drive Shaft Cv Boot Kit Wheel & Tyre Accessories - CVB96
Free delivery in 1–3 days
£14.70
Visit shop
B&QB&Q - Universal Cv Boot Cv96 Qty 1 Kit Bailcast
Free delivery in 1–3 days
£17.99
Visit shop

Product Information

Full details

The Mehr Universal CV Boot Kit (CVB96) is designed for automotive professionals and DIY enthusiasts needing to replace a damaged drive shaft boot. Its key benefit is providing a complete kit with all necessary components for a secure repair, helping to prevent further damage and costly repairs. A potential caveat is the need for precise measurement to ensure compatibility with the specific shaft diameter.

All features

Model Part NumberCVB96
BrandMehr

Extended Product Information

FAQs

What is included in the Mehr Universal CV Boot Kit CVB96?

The kit includes 2 x stainless steel clamps, one 60g sachet of MoS2 CV grease, and installation instructions.

What is the shaft diameter range for this CV boot?

The compatible shaft diameter range for this CV boot is 19-28 mm.

What is the join diameter range for this CV boot?

The compatible join diameter range for this CV boot is 56-110 mm.

Is this CV boot suitable for all vehicles?

This is a universal fit kit, but you must verify that your vehicle's shaft and join diameters fall within the specified ranges (Shaft: 19-28 mm, Join: 56-110 mm) for proper compatibility.

What type of grease is included?

The kit includes a 60g sachet of MoS2 (Molybdenum Disulfide) CV grease, which is suitable for high-pressure and high-temperature applications in CV joints.

How do I ensure a secure fit with the clamps?

Position the stainless steel clamps over the designated ribs on the CV boot and tighten them firmly with appropriate tools. Ensure they are snug to prevent any leaks or boot slippage.

What is the approximate weight of this kit?

The approximate weight of the kit is 0.24 kg.

Troubleshooting

Boot does not fit shaft

Re-measure the shaft and joint diameters. Ensure they fall within the specified ranges (Shaft: 19-28 mm, Join: 56-110 mm). If measurements are outside this range, this kit is not compatible.

Clamps will not tighten securely

Ensure the clamps are correctly positioned on the boot's designated ribs. Use the correct tool for tightening to avoid stripping. If the clamp is damaged, replace it.

Grease is difficult to apply

Ensure the grease sachet is at room temperature. Apply the grease directly into the boot and onto the CV joint before fitting the boot fully. Some force may be needed to spread it evenly.

Pros and Cons

Pros

  • Offers a complete solution with all necessary parts in one package.
  • Universal design increases compatibility across different vehicles.
  • High-quality stainless steel clamps ensure durability and rust resistance.
  • Includes specialized grease for optimal CV joint performance.

Cons

  • Requires accurate measurement of shaft diameter for proper fit.
  • Installation may require specific tools and mechanical knowledge.
  • Not a direct fit for all vehicles; compatibility must be verified.

Setup, Compatibility & Care Instructions

Setup:

  1. Measure Shaft Diameter: Accurately measure the diameter of the drive shaft where the boot will be fitted (19-28 mm) and the diameter of the joint housing (56-110 mm).
  2. Prepare Components: Clean the drive shaft and surrounding area thoroughly.
  3. Fit Boot: Slide the new CV boot over the drive shaft, ensuring it is correctly oriented.
  4. Apply Grease: Apply the provided 60g sachet of MoS2 CV grease evenly inside the boot and onto the CV joint.
  5. Secure Clamps: Position the stainless steel clamps at the designated points on the boot and tighten them securely using appropriate tools.

Compatibility:

This is a universal kit. Verify that your shaft diameter falls within the 19-28 mm range and the join diameter is between 56-110 mm. Consult your vehicle's service manual or a professional if unsure.

Care:

CV boots require no regular maintenance beyond inspection for damage. If the boot is compromised, it should be replaced immediately to prevent damage to the CV joint. Ensure clamps remain tight and free from corrosion.

Price History

DatePrice
Visit shop