Ulti-Mate Wood Screws - Gold

These multipurpose Ulti-Mate wood screws deliver high performance and professional results for a w...

Best current price£6.89from Travis Perkins

One Offer

1 offer from £6.89

View price history by clicking the chart icon.

Travis PerkinsUlti-Mate® Stick-Fit®Woodscrews 4.0 x 35mm Qty 200
£30.00 delivery
£6.89
Visit shop

Product Information

Full details

The Ulti-Mate Wood Screws in gold finish are essential for professional contractors and serious DIYers looking for a reliable, multipurpose fastener for projects involving hardwoods, softwoods, and engineered timber. These screws are engineered for high-performance, offering a rapid start and flush finishing, though users should note that while they are 100% compatible with standard POZI and Phillips bits, the proprietary Stick-Fit system provides the best one-handed driving experience.

All features

ColourGold
Model Part NumberA400351
BrandUlti-Mate

Extended Product Information

FAQs

Can I use these screws in sheet metal?

Yes, these screws are rated for use in light-gauge sheet metal applications.

Do I need to buy a special screwdriver for these?

No, they are compatible with standard POZI and Phillips bits, though the included Stick-Fit bit provides the best performance.

Are these screws suitable for outdoor use?

While durable, these are primarily designed for interior joinery and timber projects. For exterior exposure, consult the packaging for specific corrosion resistance ratings.

What happens if I lose the Stick-Fit bit?

You can continue using standard POZI or Phillips bits, though you will lose the 'stick' feature that holds the screw in place.

Will these work with MDF boards?

Yes, these screws are specifically designed to perform well in engineered timber boards like MDF, plywood, and chipboard.

Are they reusable?

These screws are intended for single-use applications to ensure maximum structural integrity and holding power.

Troubleshooting

Screw head stripping during installation

Ensure you are using the correct size bit and that the screw is not being driven at an angle; check that your drill's torque clutch is not set too high.

Screw not 'sticking' to the driver bit

Confirm you are using the included Stick-Fit driver bit and check for debris or metal shavings inside the screw head recess.

Wood splitting near the board edge

The screw is designed to minimize splitting, but if it persists, pre-drill a pilot hole slightly smaller than the shank diameter.

Pros and Cons

Pros

  • One-handed installation using the Stick-Fit driver bit
  • Excellent grip prevents cam-out and reduces tool battery drain
  • Minimizes wood splitting due to the precision-engineered shank
  • Versatile application across many different wood and board types
  • Provides a clean, professional flush finish

Cons

  • Stick-Fit bit required to unlock the full one-handed convenience
  • Gold coating may be visually distinct, which might not match every aesthetic
  • Requires proper torque settings to avoid stripping in very soft woods

Setup, Compatibility & Care

To ensure the best results, always use the provided Stick-Fit driver bit included in the box. While the screws are fully compatible with standard POZI and Phillips bits, using the intended driver bit is necessary to utilize the proprietary one-handed 'stick' feature.

  • Pre-drilling: While the slotted shank minimizes splitting, pre-drilling is recommended when working within 20mm of the edge of hardwood to prevent potential stress fractures.
  • Tool Settings: Use an impact driver or drill with an adjustable clutch. Set the torque low initially and increase until the screw head is flush with the surface to avoid over-driving.
  • Storage: Keep in a dry environment to maintain the integrity of the gold finish and prevent corrosion over long-term storage.

Similar items

Price History

DatePrice
Visit shop