Best current price£24.52from eBay
Shopping.co.uk recommended and popular offers
eBay£24.52Visit shop WoStick 10-Sheets 3D Self Adhesive Peel and Stick Wall 1.2mm thickness, White
Visit shop5 offers from £24.52 - £33.19
View price history by clicking the chart icon.
1 offer from £18.30
View price history by clicking the chart icon.
This guide is for DIY enthusiasts and homeowners looking to refresh their kitchen or bathroom aesthetics quickly and affordably. The WoStick tiles offer a fashionable, 3D gel-like texture and a whiter finish than traditional epoxy options, providing a stylish upgrade. A key caveat is that the adhesive works best on properly cleaned and smooth surfaces. These tiles feature a durable PET and adhesive construction with a silver backing for complete coverage, making them a practical choice for various interior spaces.
| Brand | WoStick |
|---|
The tiles are made from PET and ADHESIVE, offering a transparent 3D gel-like texture and a whiter finish than epoxy resin.
Each tile measures 30.5x30.5cm (approximately 12x12 inches). The individual chip size within the tile is 8.4x4.8cm.
A set includes 10 sheets of tiles.
These tiles are designed for smooth surfaces. Adhesion may be compromised on heavily textured or uneven walls. Thorough surface preparation is key.
While suitable for kitchens and bathrooms, they are primarily decorative. They are not rated for high heat environments like directly behind a stove or for prolonged exposure to excessive moisture. Ensure proper ventilation in humid areas.
To remove, gently heat the adhesive with a hairdryer on a low setting, then carefully peel the tile away from the wall, starting at the edges. Clean any residual adhesive with a mild solvent.
Yes, the tiles can be cut using a sharp craft knife or scissors for custom fits around outlets, corners, or to fill smaller spaces.
Ensure the wall surface is thoroughly cleaned, dried, and free from dust, grease, or soap residue. For existing paint, ensure it is smooth and not peeling. If the surface is slightly textured, consider using a mild adhesive enhancer specifically designed for wall tiles, applied to the wall first.
Start application from a corner or a central point that allows for easy alignment. Use a level to ensure the first row is perfectly straight. You can trim tiles carefully with a sharp craft knife for a precise fit around obstacles or edges.
Gently lift the edge of the tile immediately after application and reapply, smoothing outwards from the center. If the adhesive has set, you can try pricking a tiny hole with a fine needle and pressing the air out.
This is uncommon as adhesion is designed to improve. If it occurs, it likely indicates an issue with the initial surface preparation or an unsuitable surface. Remove the tile, clean both the wall and tile backing, and reapply with firm pressure. If the adhesive is compromised, consider a suitable adhesive spray.
Setup:
Compatibility:
These tiles are compatible with most smooth, non-porous interior surfaces, including painted drywall, smooth wood, linoleum, and existing tiles (provided they are smooth and well-adhered).
Care:
Clean gently with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals, as these can damage the 3D texture and adhesive.
