Sealey - Impact Socket - 1/2" Sq Drive - 19mm

The protective sleeve is designed to prevent the socket from scratching or damaging the finish of alloy wheels and lug nuts during use with impact tools.

Yes, you can use it with a standard 1/2" drive ratchet or breaker bar, but it is specifically designed and optimized for use with impact tools.

The socket is made from high-strength Chrome Molybdenum steel, which is hardened, tempered, and anodised for durability and corrosion resistance.

This 19mm socket is color-coded for easy size selection, making it quick to find the correct tool in a busy workshop.

While it can be used on steel wheels, its primary design advantage (the protective sleeve) is most beneficial for the softer finish of alloy wheels. It will function correctly on steel wheels.

The drive size is 1/2" square drive, which is a common size for impact wrenches and heavy-duty hand tools.

Keep the socket clean and dry. Wipe it down after use to remove debris and store it in a dry toolbox. Periodically check the condition of the protective sleeve.

Ensure you are using the correct 19mm socket and that the lug nut is not excessively worn or damaged. Check for any debris inside the socket or on the lug nut.

Discontinue use immediately to prevent wheel damage. Contact the manufacturer or retailer for a replacement sleeve or socket if available, or consider purchasing a new socket.

Verify you are using a 6-point socket (this model is) and that it is fully seated on the lug nut. Ensure the lug nut itself is not rounded. Use a breaker bar for more controlled torque if needed.

While the anodised finish provides corrosion resistance, prolonged exposure to harsh chemicals or moisture can affect it. Clean the socket thoroughly and store in a dry place. Minor corrosion typically does not affect performance but may require cleaning.