Compatible Eheim Ecco Pro Filter Foam Set - Finest-Filters

No, these are compatible replacement filter media sets made by Finest-Filters. They are designed to fit and perform the same function as original Eheim parts for the specified filter models.

It is generally recommended to replace the fine polyester pads every 4-8 weeks, and the coarse foam every 8-12 weeks or when it shows signs of degradation. However, frequency depends on aquarium stocking levels and feeding habits.

While the coarse foam can be rinsed and reused for a limited time, the fine polyester pads are best replaced to maintain optimal filtration efficiency. Reusing very dirty pads can reintroduce pollutants into the water.

The blue foam is coarse and designed to capture larger debris, protecting the finer media. The white polyester pads are fine and intended for polishing the water, removing smaller suspended particles for clarity.

This set is specifically designed for the Eheim Ecco Pro 130/200/300 and Ecco 2032/2034/2036 models. It may not fit other Eheim filter series. Please check your filter model number.

Yes, it is highly recommended to rinse the new filter media under clean, dechlorinated water before installation to remove any manufacturing dust and fine particles.

Ensure the filter media is not packed too tightly. Gently loosen the pads. Also, check that the filter intake and output are not blocked and that the filter is properly primed.

Turn off and unplug the filter. Check that all media baskets are seated correctly and that the impeller is free of debris. Ensure the filter housing is sealed properly.

This media focuses on mechanical filtration. If cloudiness persists, ensure you have adequate biological filtration, check for overfeeding, and consider a supplementary chemical filtration media if necessary. Ensure media was rinsed before installation.