Lexmark Toner Cartridges - Black - 80C2XK0

The Lexmark 802XK black toner cartridge has an estimated page yield of 8,000 pages, based on ISO/IEC 19798 standards.

It means the cartridge is sold at a discount under the agreement that it will be used only once and then returned to Lexmark for recycling or remanufacturing. It will stop working after reaching its end of life.

This cartridge is compatible with Lexmark CX510de, CX510dhe, and CX510dthe laser printers.

Power off the printer, open the toner access door, remove the old cartridge, insert the new one until it clicks, and close the door. Refer to the 'Setup' section for detailed steps.

No, the Return Program cartridge is licensed for single use only and is designed to cease functioning after its intended lifespan to facilitate return and recycling.

Unused Lexmark toner cartridges have a printing material shelf life of 2 years when stored properly in their original packaging.

Yes, using Genuine Lexmark toner and returning your empty cartridges contributes to Lexmark Rewards, allowing you to save on supplies and earn free High Yield cartridges.

Ensure the toner cartridge is properly seated. Try gently shaking the cartridge side-to-side. Run a cleaning cycle via the printer's maintenance menu. If the issue persists, the cartridge may be empty or defective.

Verify that you have installed the correct cartridge model for your printer. Ensure the protective seals and tapes have been completely removed. Reseat the cartridge firmly. If the problem continues, contact Lexmark support.

Check that the toner cartridge is correctly installed. Ensure the printer's fuser unit is functioning properly (consult your printer's manual). Avoid touching the drum surface of the toner cartridge.

Confirm the estimated page yield and your printing volume. Ensure 'Toner Save' mode is not inadvertently enabled if high quality is required. Return Program cartridges have a fixed lifespan; the message indicates it's nearing depletion.