Eaton CI Switch Box Empty - 206881

This Eaton CI-K insulated enclosure is designed to house and protect switchgear and electrical components, particularly in environments where dust and water protection are necessary.

An IP65 rating means the enclosure is dust-tight (first digit '6') and protected against water jets from any direction (second digit '5').

Yes, the IP65 rating makes it suitable for outdoor use, providing protection against environmental factors. However, direct, prolonged exposure to harsh sunlight may affect the plastic over time.

The enclosure dimensions are 120x80x95mm. The included mounting rail has a height of 72mm and a mounting depth of 7.5mm.

The enclosure is designed for rail-mounted components such as relays, terminal blocks, circuit breakers, and small PLCs. It also supports indicator lamps and emergency stop functions.

The enclosure comes with pre-made M20/M25 holes that can be opened by removing knockout sections. It also features a cable through-hole membrane for smaller cables.

The enclosure can operate reliably in ambient temperatures ranging from -25°C to +70°C.

Check for any debris on the sealing surfaces. Ensure the lid is correctly aligned and all latches or screws are fully secured.

Ensure components are DIN-rail compatible. Slide components onto the rail from the top or bottom, following their specific mounting instructions.

Inspect all cable entry points and the main lid seal for damage or improper installation. Replace any damaged seals or glands. Ensure all knockout sections not in use are properly sealed.

Verify the correct M20 or M25 knockout has been removed. Use appropriate cable glands designed for the enclosure and cable diameter. If using the membrane, ensure the cable is pushed through firmly.