Volden Draught Seal - B&Q
Best current price£14.50from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£14.50Visit shop B&Q - Black Not Self-Adhesive Draught Seal (L)15M (W)10mm (T)5mm
Visit shopB&Q£14.50Visit shop One Offer
1 offer from £14.50
View price history by clicking the chart icon.
B&QB&Q - Black Not Self-Adhesive Draught Seal (L)15M (W)10mm (T)5mm
Free delivery in 1–3 days
£14.50
Visit shop
Product Information
Full details
The Volden Draught Seal is designed for homeowners looking to improve energy efficiency and comfort by replacing old window and door seals. Its key benefit is providing a durable barrier against drafts, noise, and water, leading to a more comfortable and quieter home environment. A caveat to consider is that proper installation is crucial for optimal performance, requiring careful attention to the seal's placement.
All features
| Brand | Volden |
|---|
Extended Product Information
FAQs
What material is the Volden Draught Seal made from?
The Volden Draught Seal is made from durable uPVC (unplasticized polyvinyl chloride).
How is the draught seal installed?
It is installed using a simple push-fit mechanism into the existing groove on window or door frames. No adhesive is typically required.
Can this seal be used on all types of windows and doors?
It is designed for standard uPVC, wooden, or metal frames that have a suitable groove for the seal. It's best used to replace existing seals.
How long does the draught seal typically last?
Being made of durable uPVC, the seal is designed for long-lasting performance under normal weather conditions. Longevity also depends on regular care and maintenance.
Do I need any special tools to install it?
You will need sharp scissors or a utility knife to cut the seal to the correct length. Otherwise, installation is tool-free.
Will this seal stop all outside noise?
The seal is effective at reducing noise infiltration caused by drafts. It will not completely soundproof a room, but it significantly contributes to a quieter environment by blocking air gaps.
What should I do if the seal doesn't fit my frame's groove?
Ensure you have measured correctly and are attempting to fit it into the intended groove. If the groove is incompatible or damaged, this seal may not be suitable for your specific frame.
Troubleshooting
Draught seal is difficult to push into the groove
Ensure the groove is clean and free of debris. If the groove is slightly too narrow, you may need to apply gentle, even pressure. If the frame is uneven, this seal may not be suitable.
Seal creates too much resistance when opening/closing the window/door
Check if the seal was cut to the correct length or if it is improperly seated. Ensure the seal is not bunched up or twisted. Trim a small amount if necessary, ensuring it still maintains contact when closed.
Seal is not blocking drafts effectively
Verify that the seal is fully seated in the groove along its entire length. Check for any gaps or areas where the seal is not making firm contact with the frame. Ensure the correct type and size of seal was used for the application.
Water is still leaking in
Inspect the entire frame for other potential entry points. Ensure the seal is properly installed and making consistent contact. This seal is designed for gaps; significant structural issues may require professional assessment.
Pros and Cons
Pros
- Easy to install via push-fit mechanism
- Effective at blocking drafts and noise
- Durable uPVC material for longevity
- Helps improve home energy efficiency
- Water infiltration protection
Cons
- Requires careful measurement and cutting for a perfect fit
- May not adhere well to uneven or damaged frames
- Installation requires some manual dexterity
- Effectiveness depends on the condition of the frame
Setup, Compatibility & Care
Setup:
- Measure: Accurately measure the length of the frame where the seal needs to be applied.
- Cut: Carefully cut the draught seal to the required length using sharp scissors or a utility knife. Ensure clean, straight cuts for the best seal.
- Install: Align the seal with the groove on the window or door frame and firmly push it into place. Work your way around the entire frame, ensuring continuous contact.
- Test: Open and close the window or door to ensure the seal does not impede operation and creates a firm contact when closed.
Compatibility:
This product is designed for use on standard uPVC, wooden, or metal window and door frames that have a suitable groove or channel for the seal to sit in. It is intended to replace existing draught seals.
Care:
To maintain performance, periodically clean the seal with a damp cloth to remove dust and debris. Avoid using abrasive cleaners or solvents, as these can damage the uPVC material. Check the seal annually for any signs of wear or damage.