Bubly Dual Flush Toilet Push Button - Black

Remove the old button, choose the correct adapter, insert it into the cistern lid hole, connect the cable to the mechanism, and test the flush.

Generally, no tools are required. However, you might need a screwdriver if your old button has screws.

It's compatible with cable-operated cisterns and lid holes of 40mm, 50mm, and 60mm. Check your existing system.

Check for obstructions in the cable or mechanism. Lubricate if necessary, and ensure proper cable connection.

Wipe with a damp cloth. Avoid harsh chemicals or abrasive cleaners.

Please refer to the product packaging or retailer for warranty details.

Make sure you're using the correct adapter (40mm, 50mm, or 60mm). Measure the hole before installation.

Check the cable connection to the dual flush mechanism inside the tank.

Check for obstructions in the cable or flush mechanism. Ensure the cable is properly connected and not kinked. If necessary, lubricate the moving parts with a small amount of silicone lubricant.

Make sure the cable is securely connected to the flush valve inside the cistern. Check the water level in the tank to ensure it's at the correct level. If the flush is weak, try adjusting the cable length.

Ensure the adapter is correctly fitted into the cistern lid hole. Tighten any screws or connections. If the adapter is worn, replace it.

Verify you have the correct adapter size (40mm, 50mm, or 60mm) for your cistern lid hole. If the hole size is incorrect, the button will not fit properly.

Check the cable connection. Make sure the cable is correctly attached to the dual flush mechanism. Check for blockages.