E-Ridge 6M Universal Dry Ridge System - 3M - xRoll 210g/m2

The system is designed for standard roof pitches. Always consult local building regulations and professional advice for specific pitch requirements.

Made with durable, weather-resistant materials like polypropylene, aluminum, and stainless steel, the system is designed for long-term performance, comparable to traditional roofing components.

While the system is designed for easier installation than traditional methods, it requires careful attention to detail and adherence to installation steps. If you are not experienced in roofing, professional installation is recommended.

The kit provides a 6-meter length of ventilated ridge roll. The width and depth are designed to accommodate standard ridge tiles and ensure adequate ventilation.

Basic roofing tools are generally sufficient. You will need tools for cutting, hammering clout nails, and screwing the central clip to the ridge batten. A measuring tape is also essential.

The polypropylene mesh fabric of the ridge roll allows air to pass through, facilitating the escape of moist air from the roof space while preventing the ingress of rain, snow, and insects.

Ensure the roof tile surface is clean, dry, and free from dust or debris before applying. Press the skirt firmly onto the tiles to ensure full contact with the butyl adhesive.

Verify that all 'ratchet' clips are securely fastened and that the central clip is properly screwed into the ridge batten. Ensure the ridge batten itself is securely fixed.

Check that the malleable aluminum skirt has been dressed correctly to contour the roof tiles and create a continuous seal. Ensure there are no gaps or tears in the skirt.

Ensure the ridge roll is correctly positioned and the unions are aligned with the ridge tiles. The nylon unions are designed for flexibility; gentle manipulation may be required.