Best current price£13.44from Amazon
Shopping.co.uk recommended and popular offers
Amazon£13.44Visit shop Maclean Mctv-670 Twin Lnbf For Analogue And Digital Satellite Receiver 0.1 Db Sky 3D Full Hd Digital Switch Full Hdtv Includes 2X F-Connectors
Visit shop1 offer from £13.44
View price history by clicking the chart icon.
The Maclean MCTV-670 Universal Twin LNB is designed for users seeking high-quality digital satellite reception with the flexibility to connect two satellite receivers. Its key benefit is enabling dual receiver setups for independent viewing or recording, ensuring excellent picture quality for Full HD and 3D content. A potential caveat is that it requires proper alignment and a compatible satellite dish for optimal performance.
| Model Part Number | MCTV-670 |
|---|---|
| Brand | Maclean |
A Twin LNB has two separate outputs, allowing you to connect two satellite receivers independently from a single satellite dish.
While excellent for Full HD and 3D, the MCTV-670 is primarily specified for Full HD. For 4K, ensure your satellite service and receiver also support it and consider LNBs specifically rated for higher frequencies if required.
The LNB is designed to accommodate coaxial antenna cables with a diameter of up to 6.8 mm.
Dish alignment requires specific tools and knowledge of satellite orbital positions for your location. It's often best done by a professional installer or by following detailed guides specific to your dish model and region.
Yes, the MCTV-670 is designed to connect to and support up to two satellite receivers simultaneously. You can use just one, but the benefit of the twin outputs is for dual connections.
The noise factor (0.1 dB) measures the amount of noise the LNB adds to the signal. A lower noise factor means less added noise, resulting in a cleaner signal and better reception, especially for weaker transponders.
Ensure the satellite dish is accurately aligned. Check all cable connections for security and proper seating. Verify LNB settings in the satellite receiver menu.
Confirm that a separate coaxial cable is connected from each receiver to one of the two outputs on the LNB. Check the configuration in both satellite receivers.
Inspect cables for damage or wear. Ensure the LNB is securely mounted and not loose on the dish arm. Check for environmental factors like heavy rain or snow obstruction.
Verify that the LNB is powered correctly by the receiver. Check the receiver's LNB settings and ensure it is set to 'Universal' or the appropriate type.
Setup:
Compatibility:
Care:
