Best current price£76.79from eBay
Shopping.co.uk recommended and popular offers
eBay£76.79Visit shop 4x Bartoline Raw Linseed Oil Natural Wood Nourishing Protector Paint Varnish 5L
Visit shop
B&Q£86.39Visit shop B&Q - 4X Raw Linseed Oil Natural Wood Nourishing Protector Paint Varnish 5L
Visit shop3 offers from £76.79 - £98.99
View price history by clicking the chart icon.
This Bartoline Raw Linseed Oil is designed for wood enthusiasts seeking a natural, water-resistant finish for various wooden items and stone floors. Its key benefit is excellent protection and a classic finish, ideal for garden furniture, terracotta, and even musical instruments. However, users should be aware of the lengthy drying time and the fire hazard associated with used cloths.
| Model Part Number | RL5170 |
|---|---|
| Brand | Bartoline |
No, Bartoline Raw Linseed Oil is designed for bare wood or previously oiled surfaces. Paint or varnish must be removed first.
For best results, apply 2 to 3 coats, allowing 24 hours between each application.
Each coat requires 24 hours to dry, but the oil will take approximately 1 week to fully cure and harden.
This product is not specifically rated for food contact surfaces. For such applications, consult a product designed for that purpose.
Soiled cloths are a fire hazard and must be washed immediately with soapy water and disposed of safely outdoors.
Yes, it is ideal for exterior wood like garden furniture due to its water-resistant properties.
Oak and Teak are hardwoods that have specific oil requirements. Teak Oil is formulated to better penetrate and protect these dense timbers.
Ensure excess oil was removed thoroughly after each application. Apply another thin coat and remove excess quickly.
Ensure the surface was clean and dry before application. Check ambient temperature and humidity; avoid applying in cold or damp conditions. Ensure adequate ventilation.
This can happen if excess oil was not removed. Gently wipe the surface with a cloth slightly dampened with White Spirit. Allow to dry fully.
The surface may not have been properly prepared or has poor ventilation. Ensure all excess oil was removed and the area has good airflow. If necessary, lightly sand and reapply a thin coat.
Preparation
Before application, ensure the surface to be treated is clean and dry. Remove any old paint or stain by sanding. For optimal adhesion and finish, wipe the surface with a cloth dampened with White Spirit to eliminate grease and dirt. Address any mildew or fungal growth with a dedicated Fungicidal Wash.
Application
Apply Bartoline Raw Linseed Oil using a clean, lint-free cloth. Rub the oil into the wood thoroughly and then remove any excess. For the best results and maximum protection, apply two to three coats, allowing a full 24 hours of drying time between each coat. The oil will require approximately one week to fully harden and cure.
Compatibility
This product is suitable for all wood types and stone floors, including terracotta tiling. It is particularly recommended for garden furniture, wooden sports equipment, and musical instruments. Note: For hardwoods such as Oak and Teak, Teak Oil is the recommended product.
Care and Safety
Immediately after use, wash all application cloths thoroughly with soapy water. Dispose of used cloths safely outdoors, as they can be prone to spontaneous combustion (self-igniting) if left folded or in a pile. Clean application equipment promptly with White Spirit.
