Best current price£30.88from eBay
Shopping.co.uk recommended and popular offers
eBay£30.88Visit shop RG Tools Ratchet Crimper - RG10334
Visit shop
B&Q£41.10Visit shop B&Q - Rg Tools Ratchet Crimper Red Blue Yellow Terminals Cushioned Handle Qty 1
Visit shop2 offers from £30.88 - £41.10
View price history by clicking the chart icon.
The Van Line Ratchet Crimper is an essential tool for professional electricians and DIY enthusiasts who require secure and reliable cable termination. It provides consistent, high-quality crimps for red, blue, and yellow pre-insulated terminals, ensuring electrical connections remain stable under stress. While it is highly effective for these specific terminal sizes, users should note that it is limited to insulated connectors and cannot be used for non-insulated or specialized automotive terminals.
| Model Part Number | RG10334 |
|---|---|
| Brand | Van Line |
It supports red (0.5-1.0 mm²), blue (1.5-2.5 mm²), and yellow (4.0-6.0 mm²) pre-insulated terminals.
No, this crimper is specifically calibrated for pre-insulated terminals.
The mechanism is pre-calibrated for standard insulated terminal crimping force and does not require adjustment for standard use.
Yes, it is effective for both types, provided the total cross-section falls within the supported range.
Use a soft brush or compressed air to remove plastic shavings or debris after each use.
The tool must complete a full cycle to release; ensure the handles are squeezed until they click open. If they are truly jammed, check for debris in the die teeth.
Verify you are using the correct color-coded die for your terminal size and ensure the wire is fully inserted before crimping.
To achieve optimal performance, ensure your wire is stripped to the correct length recommended by your terminal manufacturer. To maintain the tool, keep the ratchet mechanism lightly lubricated with a high-quality machine oil to prevent sticking. Store in a dry, cool place away from moisture to avoid corrosion on the crimping dies. Avoid using the tool on terminals or wires outside the specified 0.5-6.0 mm² range, as this can misalign or damage the internal dies.
