Origin Storage TLC830 Series 480GB SSD


Currently unavailable


Currently unavailable
The Origin Storage TLC830 Series 480GB 2.5in SATA III SSD is designed for PC and laptop users seeking a significant storage performance upgrade. Its key benefit is a substantial speed increase over traditional hard drives, offering faster boot times and application loading. A potential caveat is its SATA III interface, which, while standard, is not as fast as newer NVMe interfaces for the most demanding workloads.
| Series | TLC830 |
|---|---|
| Model Part Number | CT480BX500SSD1-OS |
| Brand | Origin Storage |
SSDs use flash memory and have no moving parts, resulting in significantly faster data access speeds, lower power consumption, and greater durability compared to HDDs, which use spinning platters.
The SSD uses a standard 2.5-inch form factor and a SATA III interface, making it compatible with most laptops and desktops manufactured in the last 10-15 years that have a 2.5-inch drive bay and a SATA port.
3D TLC refers to 3D Triple-Level Cell NAND flash memory. '3D' means the memory cells are stacked vertically, and 'TLC' means each cell stores three bits of data. This technology offers a good balance of performance, endurance, and cost.
Origin Storage offers up to a 5-year advanced replacement warranty on their Matched SSD Solutions, including this model.
Typically, no. Most modern operating systems like Windows and Linux have built-in support for SATA SSDs. Ensure your system's SATA controller drivers are up to date via your motherboard or laptop manufacturer's website.
The TBW (Terabytes Written) rating for this SSD is 100 TBW.
While designed for PCs and laptops, Origin Storage offers Enterprise-grade SSDs for servers. This specific model is designated for PC/Laptop use.
Check SATA data and power cable connections. Ensure the SSD is properly seated in the drive bay. Verify that the SATA port is enabled in the BIOS/UEFI. Try a different SATA port and cable if available.
Ensure the SSD is connected to a SATA III port (6 Gbit/s). Confirm that TRIM is enabled in your operating system. Check for background processes consuming disk resources. Update system drivers, especially chipset drivers.
Ensure the SSD is set as the primary boot device in BIOS/UEFI. If cloning from an old drive, ensure the cloning process was successful and all necessary boot files were transferred. Re-initialize and install the operating system fresh if issues persist.
Initialize and format the drive using Disk Management in Windows or Disk Utility in macOS/Linux. Ensure the partition is set up correctly to utilize the full capacity.
Setup:
Compatibility:
Care: