Best current price£5.99from Minerva
Shopping.co.uk recommended and popular offers
Minerva£5.99Visit shop Minerva Aqua Glue Marker Yellow Prym 987185
Visit shop
Amazon£6.50Visit shop Prym Aqua glue marker,Yellow,12 x 0.02 x 0.02 cm
Visit shop3 offers from £5.99 - £7.07
View price history by clicking the chart icon.
This Prym Aqua Glue Marker is designed for sewers and crafters who need to temporarily secure fabrics, trims, lace, and zippers without pins. Its key benefit is providing a strong, visible adhesive line that disappears when dry and washes out completely, allowing for precise placement and easy removal. A minor caveat is the need to test on fabric samples first to ensure compatibility and observe drying characteristics. This refillable, non-toxic glue marker offers a clean alternative to pinning, ensuring accurate seam allowances and intricate embellishments.
| Model Part Number | 987185 |
|---|---|
| Brand | Prym |
Remove the cap and apply a thin, even line of the yellow glue directly onto the fabric or trimming where you want to secure it. Press the fabric or trimming onto the glued area. Allow the glue to dry; the yellow color will disappear.
No, the yellow color is temporary. It is designed to disappear completely once the glue is dry. If any residue remains after washing, it indicates the glue was not fully removed or was applied excessively.
Drying time can vary depending on the fabric type, thickness, and ambient humidity. Typically, it dries within a few minutes to allow for stitching. It is recommended to test on a fabric sample to determine the drying time for your specific project.
It is suitable for most common sewing fabrics. However, due to variations in fabric finishes and types, it is essential to perform a test on a sample piece of fabric first to ensure compatibility and complete washability.
The glue is designed to dissolve completely and wash out easily in a standard laundry cycle. For immediate removal of accidental spills before drying, use a damp cloth.
No, the Prym Aqua Glue Marker is intended for temporary positioning and is fully washable. It is not a permanent adhesive.
The marker is refillable using Prym Aqua glue marker refill cartridges. Remove the empty cartridge and insert a new one, following the specific instructions provided with the refill packaging.
Ensure the cap is removed properly. Press the tip lightly onto a scrap piece of paper or fabric to prime the flow. If the marker has been stored for a long time, the tip may be dry; try gently moistening the tip with a damp cloth.
This can happen if too much glue was applied or if the drying conditions were not optimal. Ensure you have followed the recommended application (thin line) and allow adequate drying time. Test on a fabric sample first to understand its drying behavior on different materials.
Always test washability on a fabric sample first. Some fabric finishes or dyeing processes may affect how the glue dissolves. Ensure you are washing according to fabric care instructions. Excessive glue application may also require a more thorough wash.
Apply the glue in a thin, even line rather than a thick layer. Allow the glue to dry completely; the stiffness should dissipate once washed out. Test on a sample to confirm.
Setup:
Compatibility:
Care:
