Detectable Underground Warning Mesh - Street Lighting Cable - 230mm X 100Mtr

Its primary purpose is to provide a clear, unmistakable warning of buried street lighting cables, preventing accidental damage during excavation through both visual and electronic detection methods.

The mesh contains two embedded stainless steel wires that act as tracers. These wires can be detected by standard electronic cable locators or metal detectors.

Typically, the mesh is installed between 150mm and 300mm below the final surface level, directly above the buried cable.

While designed specifically for street lighting, its detection properties might be applicable to other metallic services. However, verification against project specifications and local regulations is recommended.

The open mesh design allows soil to pass through and embed within it. This creates a stronger bond between the tape and the surrounding soil, helping to keep it securely in place underground.

Yes, the HDPE construction is rot-resistant, designed to withstand typical underground soil conditions without degrading.

If the mesh is damaged, the printed warning may become less legible. The electronic tracers might also be severed, reducing the effectiveness of electronic location in that specific area.

Ensure the locator is set to the correct frequency for detecting tracers. Verify the mesh is installed at the expected depth and that the stainless steel wires are not damaged. Check that the locator wand is directly above the mesh line.

Ensure the trench walls are stable. Use temporary weights or pegs to hold the mesh in position while backfilling, especially in windy conditions or on slopes.

This is unlikely given the repeating nature of the print. Ensure excavation is proceeding carefully to avoid completely shredding the material.