Montpellier Tumble Dryer - 8 kg, Condenser, Sensor Dry - B

Clean the lint filter after every drying cycle.

The water reservoir is usually located at the top or bottom of the dryer. Remove the reservoir and empty the water into a sink. Replace the reservoir before the next use.

The Sensor Dry function automatically detects when the clothes are dry and stops the cycle, preventing over-drying and saving energy.

Yes, the Delay Start feature allows you to set the dryer to start at a later time, offering convenience and the potential to use cheaper electricity rates.

The dryer offers 15 drying programs, including options for cotton, synthetics, wool, delicates, shirts, and sports.

You can set the Timed Dry function for up to 180 minutes, allowing for customized drying times for specific items or loads.

The condenser system collects moisture in a reservoir, eliminating the need for external venting.

The product warranty information is provided in the documentation that comes with the product. Refer to the documentation for details.

Check if the dryer is plugged in and the power outlet is working. Ensure the door is closed properly. Check if the child lock is enabled.

Check and clean the lint filter. Ensure you have selected the correct drying program for the fabric type. Make sure the water reservoir is not full. Avoid overloading the dryer.

Refer to the user manual for the specific error code meaning and troubleshooting steps.