Toolpak Keyless Drill Chuck - SDS Plus Adaptor - 13mm

The Toolpak Keyless Drill Chuck is designed for drills up to 800W, featuring a lightweight and rus...

Best current price£13.26from B&Q

One Offer

1 offer from £13.26

View price history by clicking the chart icon.

B&QB&Q - Keyless Drill Chuck W/ Sds Plus Adaptor & 13mm Round Shank BitsLightweight Rotary Percussion Drilling
Free delivery in 1–3 days
£13.26
Visit shop

Product Information

Full details

The Toolpak Keyless Drill Chuck is an ideal utility accessory for DIY enthusiasts and professionals using drills up to 800W who need quick bit changes without the hassle of a traditional chuck key. It provides the essential benefit of versatility for rotary and percussion drilling tasks, though users must be aware that it is strictly prohibited for use with high-impact hammer action settings.

All features

BrandToolpak

Extended Product Information

FAQs

Can I use this chuck with hammer mode?

No, this product is strictly for rotary and percussion drilling only. Using it with hammer action will damage the chuck.

What is the maximum drill size this chuck can hold?

The chuck has a capacity range of 1.5mm to 13.0mm.

Is this compatible with all SDS drills?

It is designed for use with SDS Plus drills using the provided adaptor.

How do I ensure the chuck stays secure?

Ensure the 1/2 inch x 20 UNF mount is tightened firmly to the adaptor during initial setup.

Does this chuck require a key?

No, this is a keyless drill chuck designed for manual tightening and loosening.

Troubleshooting

Bit slipping during operation

Ensure the chuck is tightened sufficiently by hand until you hear or feel the ratcheting mechanism engage fully.

Chuck is difficult to turn

Check for debris or dust accumulation inside the jaws and clean with compressed air or a soft brush.

Chuck vibrating or wobbly

Verify that the SDS Plus adaptor is threaded tightly onto the chuck base and that it is properly locked into the drill head.

Pros and Cons

Pros

  • Tool-free bit changes save significant time
  • Lightweight construction reduces wrist fatigue
  • Resistant to rust for long-term reliability
  • Versatile 1.5mm to 13mm capacity range

Cons

  • Not suitable for hammer action drilling
  • Limited to power tools rated at 800W or less
  • Requires proper tightening to prevent bit slippage

Setup, Compatibility & Care

To install, screw the included SDS Plus adaptor firmly onto the 1/2 inch x 20 UNF mount of the chuck. Ensure the adaptor is fully seated before inserting it into your SDS Plus drill. To load a drill bit, rotate the chuck housing until the jaws are opened to the desired width, insert the bit, and turn the housing in the opposite direction until you feel a firm grip. To clean, simply wipe the chuck with a dry cloth periodically to remove drilling dust. Avoid submerging the unit in water or using harsh degreasers that could strip the internal lubrication.

Similar items

Price History

DatePrice
Visit shop