Best current price£143.90from Amazon
Shopping.co.uk recommended and popular offers
Amazon£143.90Visit shop Dab Nero / Verde Nova 300 Ma 0,30 Hp Submersible Pump With Float For Clear Water Drainage For Domestic And Residential Use
Visit shop2 offers from £143.90
View price history by clicking the chart icon.
The DAB NOVA 300 M-A Submersible Pump is designed for homeowners and garden enthusiasts needing efficient water transfer for irrigation, domestic supply, or emergency dewatering. Its key benefit lies in its automatic operation and ability to handle slightly cloudy water with solids up to 10 mm, making it versatile for various tasks. A potential caveat is its suitability primarily for clean to slightly cloudy water, not heavily soiled applications.
| Model Part Number | 60198218H |
|---|---|
| Brand | Dab |
The DAB NOVA 300 M-A is designed for clean water and slightly cloudy water with suspended solids up to 10 mm in diameter.
It features an integrated float switch. The pump automatically turns on when the water level reaches approximately 28.5 cm and turns off when the level drops below a certain point, ensuring continuous operation without manual intervention.
Yes, the automatic float switch allows for unattended operation for tasks like draining. However, always ensure the pump is properly positioned and the discharge hose is clear.
The pump can draw water down to approximately 8 mm from the surface, allowing for a more thorough emptying of areas.
Regularly clean the suction grille to prevent blockages. After use, rinse with clean water, and store in a frost-free, dry place when not in use. Ensure the float switch moves freely.
It means the pump can operate for up to one minute without water before potential damage occurs. It's a safety feature to prevent immediate burnout if water runs out, but it should not be operated dry for extended periods.
No, this pump is intended for clean to slightly cloudy water. It is not suitable for sewage, heavily soiled water, or abrasive liquids.
Check if the power cord is securely plugged in. Verify the water level is above the pump's activation point (around 28.5 cm). Ensure the float switch is not obstructed and can move freely.
Inspect the suction grille and impeller for blockages (hair, debris, leaves). Clean thoroughly. Ensure the discharge hose is not kinked or blocked.
Check for air leaks in the discharge hose connection. Ensure the pump is fully submerged and has sufficient water to prime. The pump might be air-locked; try removing it from the water, submerging it, and then restarting.
The water level may be too low for the float switch to maintain operation. Ensure the water level is sufficient to keep the pump submerged and operating for a reasonable duration. Check if the float switch is set correctly for the desired water level.
Setup:
Compatibility:
Care:
